Sharp AR-207 User Programs, List of user programs, Program Program name Description

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

List of user programs

This copier has the following user programs.

	Program	Program name	Description
	No.
1		Auto clear time	Sets the auto clear time. The copier returns to the initial settings
			when the auto clear time elapses after the last copy is made.
2		Preheat mode	Sets the time that elapses before the copier enters the preheat
			mode after any operation is made. See page 58.
3		Auto power shut-off	Sets the time that elapses before the copier enters the auto power
		timer	shut-off mode after any operation is made. See page 58.
4		Stream feeding mode	Enables or disables the stream feeding mode. See page 14.
5		Auto power shut-off setting	Enables or disables the auto power shut-off mode. See page 58.
6		Border line for 2 in 1 or	Enables or disables the border line which is printed in 2 in 1 or 4 in 1
		4 in 1	copying. See page 37.
7		Rotation copy	Enables or disables rotation of original images. See page 36.
8		Auto paper select mode	Enables or disables the auto paper selection. See page 15.
9		Auto tray switching	Enables or disables the automatic tray switching which occurs when paper
			in a tray runs out. (This switching cannot switch to the bypass tray.)
10		Auditing mode	Enables or disables the auditing mode, which controls access to
			copier. See page 13.
11		Account number entry	Registers accounts for auditing mode.
12		Account number change	Changes account numbers for auditing mode.
13		Account number deletion	Deletes accounts for auditing mode.
14		Number of copies	Displays the total number of copies made against account numbers.
		per account
15		Resetting account	Resets all audit accounts or resets any desired individual account.
16		Erase width adjustment	Sets the amount of the edge erase and center erase areas. See page 39.
17		Layout in 2 in 1 copy	Selects a pattern for 2 in 1 copying. See page 37.
18		Layout in 4 in 1 copy	Selects a pattern for 4 in 1 copying. See page 37.
19		Offset of paper output tray	Enables or disables the offset function of the paper output tray. The offset
			function can be specified respectively for the upper and lower areas
			separated by an optional job separator tray. See page 27.
20		Image rotation in duplex	Enables or disables image rotation (180°) of the front side in one-sided to
		copying	two-sided copying or two-sided to one-sided copying. See page 22.
22		Location of the margin	Selects the location of the expanded margin. See page 41.

GENERAL INFORMATION User programs

51