Sharp AR-207 User Maintenance, Transfer charger cleaning, Charger cleaner out by holding the tab

Page 63

USER MAINTENANCE

Transfer charger cleaning

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure.

1

2

Turn the power switch off.

Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops.

	Gently lift and pull out the upper paper tray and take the
Charger cleaner	3 charger cleaner out by holding the tab.

Set the charger cleaner onto the transfer charger and

4 gently slide the cleaner in the direction indicated by the arrow two or three times.

Slide the charger cleaner from one end to the other end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur.

●If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth.

Return the charger cleaner to its original position.

5 Close the upper paper tray. Close the side cover by pressing the handle on the cover.

6 Turn the power switch on.

GENERAL INFORMATION User maintenance

61

Image 63

Contents AR-207 Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Alarm indicators Interrupt key and indicator pZoom indicator p.24 Paper Size indicatorsAuto Paper Select indicator Start key and indicatorPreset Ratio selector keys and indicators Original Size Enter key and indicatorsCopier Installation Do not install your copier in areas that areAlso make certain the outlet is properly grounded Do not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Normal Copying Power onTurn the power switch on Stream feeding modeAdjust the copy density Ensure that the one-sided to one-sided copying mode isNormal Copying Ensure that no original is left on the original table Set the number of copies using the numeric keysTwo-sided copies from one-sided originals Press the Start keyTwo-sided copies from two-sided originals Set the number of copies and press the Start keySet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originalsEnsure that the desired paper tray is selected Close the document feeder coverCopying from the Original Table Copying from the original table Setting image rotation in duplex copying Select the desired parameter using the numeric keysPress the Original to Copy key Automatic REDUCTION/ENLARGEMENT/ZOOMTo increase the ratio REDUCTION/ENLARGEMENT/ZOOMManual Ratio, then pressUnfold the bypass tray Bypass Feed special paperBypass Feed special paper Offset stack Sort modeGroup mode SORT/GROUPCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display key XY ZoomXY Zoom Use the Preset Ratio selector , keys and zoomReverse Dual page Copy Press the Dual page Copy keyPlace the originals on the original table with the center 2 x 11 is performed, the image cannot be rotated Rotation Copying1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric keyPress the Erase key to select the desired erase mode EraseEnsure that the desired copy paper size is selected Erase To confirm or set the location of the margin, press Until the Margin Shift indicator will blinkMargin Shift Place the original in the document feeder tray or onPush the toner cartridge lock release lever and pull Toner Cartridge ReplacementPress the light key Toner Cartridge ReplacementToner cartridge life Than 5 secondsFirst confirm the misfeed location Misfeed in the RspfIf the misfed original cannot be removed in steps 1 Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierPush gently on both sides of the front cover to open Cover Removing itArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on Cover Misfeed in the upper paper trayIf the misfed paper is not seen in , gently lift Misfeed in the lower paper trayPull out the lower paper tray and remove the misfed paper Close the paper tray Close the lower side coverDeveloper Required Maintenance RequiredUser Programs List of user programsProgram Program name Description Program name Program No Setting the user programsEnter a program number using the numeric keys User ProgramsTo continue with other user programs, press the key Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Use the copy ratio display key to select the account Number to be changedPress and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Copying from the auto power shut-off mode Power Save ModesSetting the power save modes Copying from the preheat modeBypass tray paper feed roller User MaintenanceBypass tray with a soft, clean cloth dampened with Original table and document feeder coverGently lift and pull out the upper paper tray and take User MaintenanceTransfer charger cleaning Charger cleaner out by holding the tabCopier TROUBLE? Problem SolutionProblem Copier TROUBLE?COPY/FAX key Example Self-diagnostic functionTypes and sizes of copy paper SuppliesStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageRspf SpecificationsReversing Single Pass Feeder SpecificationsOptional Equipment System Configuration Loading copy paper Part NamesMisfeed removal AR-DE5 SpecificationsIndex Index Routes of Entry Material Safety Data SheetEmergency and First Aid Procedures ProductVapor Density Ignition TemperatureSpecial Fire Fighting Procedure Specific Gravity Vapor PressureMedical Conditions Generally Aggravated by Exposure IngredientsProportion Health HazardsAppearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable ViscosityMemo For users in the USA Sharp Corporation