Sharp AR-207 operation manual Press the Erase key to select the desired erase mode

Page 41

ERASE

Edge erase
A	A

Center erase

AB A B

Edge + Center erase

A B

A B

This copier has an edge erase mode and a center erase mode.

●Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original.

●Center erase can be used to eliminate the shadow produced by the bindings of bound documents.

●Edge + center erase can be used to eliminate shadow lines around the edges of copies and to eliminate the shadow at the center of copies.

●The erase width can be set from 0" to 1" in five steps using user program No. 16. See page 51.

●This feature cannot be used with the 2 in 1 or 4 in 1 feature.

	SPECIAL
Place the original on the original table and close the	FEATURES
1 document feeder cover.
● The RSPF can also be used for this feature.	Erase
	Erase

Press the ERASE key to select the desired erase mode.

2 ● To select the EDGE + CENTER ERASE mode, press the ERASE key until both the EDGE and CENTER indicators light up.

3	Ensure that the desired copy paper size is selected.
	● The bypass tray and any tray with non-standard size paper cannot be

used for this feature.

39

Image 41

Contents AR-207 Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.24 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Paper Select indicatorAlso make certain the outlet is properly grounded Copier InstallationDo not install your copier in areas that are Do not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key Auditing Accounts When copying is completed, press the Audit Clear KeyEnter your account number using the numeric keys Turn the power switch on Power onStream feeding mode Normal CopyingNormal Copying Adjust the copy densityEnsure that the one-sided to one-sided copying mode is Two-sided copies from one-sided originals Set the number of copies using the numeric keysPress the Start key Ensure that no original is left on the original tableSet the number of copies and press the Start key Two-sided copies from two-sided originalsSet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originalsEnsure that the desired paper tray is selected Close the document feeder coverCopying from the Original Table Copying from the original table Press the Original to Copy key Setting image rotation in duplex copyingSelect the desired parameter using the numeric keys Automatic REDUCTION/ENLARGEMENT/ZOOMManual REDUCTION/ENLARGEMENT/ZOOMRatio, then press To increase the ratioUnfold the bypass tray Bypass Feed special paperBypass Feed special paper Group mode Sort modeSORT/GROUP Offset stackSet the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display key XY ZoomXY Zoom Use the Preset Ratio selector , keys and zoomReverse Place the originals on the original table with the center Dual page CopyPress the Dual page Copy key 2 x 11 is performed, the image cannot be rotated Rotation Copying1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric keyEnsure that the desired copy paper size is selected Press the Erase key to select the desired erase modeErase Erase Margin Shift Until the Margin Shift indicator will blinkPlace the original in the document feeder tray or on To confirm or set the location of the margin, pressPush the toner cartridge lock release lever and pull Toner Cartridge ReplacementToner cartridge life Toner Cartridge ReplacementThan 5 seconds Press the light keyFirst confirm the misfeed location Misfeed in the RspfMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1Push gently on both sides of the front cover to open Cover Removing itArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on Cover Misfeed in the upper paper trayPull out the lower paper tray and remove the misfed paper Misfeed in the lower paper trayClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently liftDeveloper Required Maintenance RequiredProgram Program name Description User ProgramsList of user programs Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoTo continue with other user programs, press the key Enter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Use the copy ratio display key to select the account Number to be changedPress and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeBypass tray with a soft, clean cloth dampened with User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerTransfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeCopier TROUBLE? Problem SolutionCOPY/FAX key ProblemCopier TROUBLE? Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isRspf SpecificationsReversing Single Pass Feeder SpecificationsOptional Equipment System Configuration Loading copy paper Part NamesMisfeed removal AR-DE5 SpecificationsIndex Index Emergency and First Aid Procedures Material Safety Data SheetProduct Routes of EntrySpecial Fire Fighting Procedure Ignition TemperatureSpecific Gravity Vapor Pressure Vapor DensityProportion IngredientsHealth Hazards Medical Conditions Generally Aggravated by ExposureAppearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable ViscosityMemo For users in the USA Sharp Corporation