Sharp AR-207 Clear key, Start key and indicator, Clear ALL key, Auto Paper Select indicator

Page 9

PART NAMES AND FUNCTIONS

Not used for the copier features.

1st display

 

2nd display

 

 

 

 

 

 

 

 

 

 

 

 

Press and hold down the key.

12,345 sheets output

Note:

●Two-sided copies are counted as two copies.

●11" x 17" size copies are counted as two copies.

CLEAR key

Clears the copy quantity display or terminates a copy run.

START key and indicator

Copying is possible when the indicator is on. Press to start copying.

CLEAR ALL () key

Clears all selected settings and returns the copier to the initial settings.

PRESET RATIO selector keys and indicators

(p. 24)

Use to sequentially select preset reduction/enlargement copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%.

ORIGINAL SIZE ENTER key and indicators

Use to input the original size.

AUTO PAPER SELECT indicator

Paper of the proper size will be automatically selected depending on the original size and selected copy ratio when this indicator is on.

TRAY SELECT key (p. 15)

Use to manually select a paper tray.

AUTO IMAGE key and indicator

Press for automatic copy ratio selection.

Paper feed location/misfeed location indica- tors (p. 44)

The selected paper feed location is shown by a lit indicator ().

Depending on the country or area, some keys will be indicated with either an English name or a symbol.

The general location of misfed paper is shown by a

blinking red indicator ().

DUAL PAGE COPY key and indicator (p. 35) Use to make individual copies of two originals placed side by side on the original table.

ERASE key and indicators (p. 39)

Press to select the edge erase and/or the center erase mode.

MARGIN SHIFT key and indicator (p. 41)

Shifts text or image on the copy to leave a binding margin on the left (or the top) side of the copy.

ORIGINAL TO COPY key and indicators (p. 15) Press to select one-sided and two-sided copy modes.

:Two-sided copies from one-sided originals.

:Two-sided copies from two-sided originals.

:One-sided copies from two-sided originals.

Initial settings

The copier assumes the initial settings when it is first turned on, when the CLEAR ALL () key is pressed, and ap- proximately one minute* after the last copy is made in any mode.

●Copy ratio: 100%

●Exposure: Automatic

●Copy quantity: 0

●All special copier modes: Off

●Auto paper selection: On

●Paper feed station: Previously selected paper tray

*This time (auto clear time) can be changed. See page 51,

USER PROGRAMS.

GETTING STARTED Part names and functions

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AR-207 Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.24 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Paper Select indicatorCopier Installation Do not install your copier in areas that areAlso make certain the outlet is properly grounded Do not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Turn the power switch on Power onStream feeding mode Normal CopyingAdjust the copy density Ensure that the one-sided to one-sided copying mode isNormal Copying Two-sided copies from one-sided originals Set the number of copies using the numeric keysPress the Start key Ensure that no original is left on the original tableTwo-sided copies from two-sided originals Set the number of copies and press the Start keySet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originalsEnsure that the desired paper tray is selected Close the document feeder coverCopying from the Original Table Copying from the original table Setting image rotation in duplex copying Select the desired parameter using the numeric keysPress the Original to Copy key Automatic REDUCTION/ENLARGEMENT/ZOOMManual REDUCTION/ENLARGEMENT/ZOOMRatio, then press To increase the ratioUnfold the bypass tray Bypass Feed special paperBypass Feed special paper Group mode Sort modeSORT/GROUP Offset stackCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display key XY ZoomXY Zoom Use the Preset Ratio selector , keys and zoomReverse Dual page Copy Press the Dual page Copy keyPlace the originals on the original table with the center 2 x 11 is performed, the image cannot be rotated Rotation Copying1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric keyPress the Erase key to select the desired erase mode EraseEnsure that the desired copy paper size is selected Erase Margin Shift Until the Margin Shift indicator will blinkPlace the original in the document feeder tray or on To confirm or set the location of the margin, pressPush the toner cartridge lock release lever and pull Toner Cartridge ReplacementToner cartridge life Toner Cartridge ReplacementThan 5 seconds Press the light keyFirst confirm the misfeed location Misfeed in the RspfMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1Push gently on both sides of the front cover to open Cover Removing itArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on Cover Misfeed in the upper paper trayPull out the lower paper tray and remove the misfed paper Misfeed in the lower paper trayClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently liftDeveloper Required Maintenance RequiredUser Programs List of user programsProgram Program name Description Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoTo continue with other user programs, press the key Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Use the copy ratio display key to select the account Number to be changedPress and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeBypass tray with a soft, clean cloth dampened with User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerTransfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeCopier TROUBLE? Problem SolutionProblem Copier TROUBLE?COPY/FAX key Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isRspf SpecificationsReversing Single Pass Feeder SpecificationsOptional Equipment System Configuration Loading copy paper Part NamesMisfeed removal AR-DE5 SpecificationsIndex Index Emergency and First Aid Procedures Material Safety Data SheetProduct Routes of EntrySpecial Fire Fighting Procedure Ignition TemperatureSpecific Gravity Vapor Pressure Vapor DensityProportion IngredientsHealth Hazards Medical Conditions Generally Aggravated by ExposureAppearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable ViscosityMemo For users in the USA Sharp Corporation
Top Page Image Contents