Instructions for attaching a VESA compliant arm
The stand may be removed.
1.Turn off the monitor, and remove the analog signal cable, the audio cable and the power cord from the monitor.
2.Being careful not to damage the monitor, spread out a soft cloth and lay the monitor on it display- side down.
3.Remove the four screws and then remove the stand from the monitor.
CAUTION!
-Be careful not to get your fingers pinched between the display and stand nor to let the stand drop. These could lead to injury.
Notes:
-The stand is specially made for use with this monitor. Once having removed the stand, never attempt to attach it to another device.
-Once having removed the screws, store them together with the stand and if the stand is ever
4.Follow instruction no.6 on page 24 to attach the arm to the monitor, then connect the analog signal cable, the audio cable and the power cord.
English
25