Tips and safety precautions
-The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor.
-Do not display a still picture for a long time, as this could cause afterimage to remain.
-If the brightness is adjusted to the minimum setting it may be difficult to see the screen.
-The quality of the computer signal may influence the quality of the display. We recommend using a computer able to emit high quality video signals.
-When the power is turned off or the monitor switches to the
-Never rub or tap the monitor with hard objects.
-Please understand that Sharp Corporation bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.
-This monitor and its accessories may be upgraded without advance notice.
Location
-Do not use the monitor where ventilation is poor, where there is a lot of dust, where humidity is high, or where the monitor may come into contact with oil or steam, as this could lead to fire.
-Ensure that the monitor does not come into contact with water or other fluids. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock.
-Do not place the monitor on top of unstable objects or in unsafe places. Do not allow the monitor to come into contact with strong shocks or vibrations. Causing the monitor to fall or topple over may damage it.
-Do not use in places where the monitor will be subject to direct sunlight, near heating equipment or anywhere else where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire.
The Power Cord
-Do not damage the power cord nor place heavy objects on it, stretch it or overly bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock.
-Use only the power cord supplied with the monitor.
-Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating.
Monitor and accessory checklist
-Please check that the following items are included in the package.
-LCD monitor (1)
-Analog signal cable (1)
(model name:
-Audio cable (1)
(model name:
-Utility Disk (For Windows/Macintosh) (1)
-Operation manual (1)
Notes:
-Use only the cables supplied with the monitor.
-You are advised to retain the carton in case the monitor needs to be transported.
-Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
-The shape of the supplied accessories may not be exactly same as shown in this manual.
Manual Scope
-In this manual, Microsoft Windows XP will be referred to as "Windows XP", Microsoft Windows Millennium as "Windows Me", Microsoft Windows 2000 as "Windows 2000", Microsoft Windows 98 as "Windows 98", Microsoft Windows 95 as "Windows 95", and Microsoft Windows Version 3.1 as "Windows 3.1". When there is no need to distinguish between programs, the term "Windows" will be used.
-Microsoft and Windows are registered trademarks of Microsoft Corporation.
-Macintosh is a registered trademark of Apple Computer, Inc.
-All other brand and product names are trademarks or registered trademarks of their respective holders.
8