Allied Telesis AT-X210-9GT, AT-X210-24GT, AT-X210-16GT manual Standby

Chapter 1: Overview

Figure 6. FAULT LED on AT-x210-9GT

CONSOLE

FAULT

RESET STANDBY

POWER RS-232

L/A LINK / ACT

MODE SPEED / DUPLEX

L/A

1 3 5 7 9 11 13 15R

MODE

MODE

SPEED

SELECT L/A

2 4 6 8 10 12 14 16R

MODE

DUPLEX

FAULT LED

Table 2 describes the functions for the FAULT LED for the AT-x210-9GT and AT-x210-16GT switches.

Table 2. AT-x210-16GT and AT-x210-24GT FAULT LED Functional

Descriptions

LED	State	Description
FAULT	Off	The switch is receiving AC input power and is
		operating normally
	6 flashes in	Flashing indicates the switch is overheating.
	2 seconds	Contact Allied Telesis for support and advice.
	Steady	Indicates the system is experiencing failure.
	Green
	Figure 7. FAULT LED on AT-x210-16GT

Table 3 describes the functions for the STANDBY LED for the AT-x210- 9GT and AT-x210-16GT switches.

Table 3. AT-x210-16GT and AT-x210-24GT STANDBY LED Functional

Descriptions

LED	State	Description
STANDBY	Off	STANDBY is not supported. The LED is not lit.

14