Paxar 656 / 636 user manual Stock / Ink Advance

Page 53

Stock / Ink Advance

Problem

Probable Cause

Corrective Action

Stock does not advance when the start button is depressed.

1) No batches to be printed.

1)Download batch (if batch downloaded uses the same format as a previously downloaded batch the machine with start automatically).

2) An interlock condition exists.

2)Determine the number and type of interlock(s) by reading the front panel display. As each is corrected the number of errors will decrease (Example "Error 910 Stock Out" reload stock).

3) Feed motor unplugged or faulty.

3)Check feed motor cable and or replace feed motor.

4)Thermal Control Board unplugged or faulty.

4)Check Thermal Control Board / AT board connection and or replace Thermal Control Board.

5) Feed roller not gripping stock.

5)Adjust the feed pressure. Refer to "Mechanical Adjustment Of Feed Roller Pressure".

6)

Feed rollers bound.

6)

With power off check that all

 

 

 

rollers turn freely.

 

 

 

 

7)

Stock bound.

7)

With the print head and feed open

 

 

 

check that the stock will pull

 

 

 

through the printer with little to no

 

 

 

resistance.

 

 

 

 

Users Manual Model 656/636

Electrical Trouble Shooting • 47

Image 53
Contents Paxar Systems Group Manual Edition February Model 656This page intentionally blank Contents Electrical Connections Assembly Drawings Page Introduction Safety Issues / WarningsScope Limited Warranty Warranty InformationService PartsLocation of Printer Customer ResponsibilityUnpacking AC Power LinePaxar 656 / 636 Tool KIT #351390 Inventory of ComponentsInstalling the Stacker Printer SetupInstall P.C. Boards as follows Fuse ConfigurationBoard Installation Installing the Power Cord TCB Dip Switch S2 SettingsInstalling the PC Software Installing the PC Interface CablePrinter Description Product DescriptionUnit Specification Personal Computer SpecificationsSelfform Paxar Field Engineer Must be Present Installing Ink RibbonPrinter Operation Stock Threading Loading StockButt Splice Web Guide AdjustmentFigure Print Head Open / Closed Print Head Open / ClosePrinter Controls Control Panel OperationStart FeedStop Error Indicator LightsOn Line SensorPrint Reports Front Panel Menu FunctionsLCD Display Diagnostic TestsLast Batch WAS Imager VXX Ready for Batches Imager VXX Batch ID QTYBuilding Image Imager VXX Display Modes Print Report ModePress Enter for Print Reports Press Enter to Print Last Verifier ScanSetup Mode Change the CUT Cutter is Disabled Press Enter to EnableChange Strobe Strobe 0 NEW Strobe +2 Emulation MODE630 NEW Emulation MODE650Transfer TYPE052 NEW Transfer TYPE000 Life Counters ModePress Enter to Print Checkout Format Press Enter for Life CountsProtected Mode Verifier is Enabled Press Enter to Disable Change Password 4 Digits NEW WordChange DATE/TIME Press Enter For 2ND LanguageHandling Maintenance / AdjustmentsPrint Head Handling Supplies Print Head CleaningProcedure Print Head Replacement Clean Platen Roller Print Head AdjustmentPrint Head Pressure Setting TangentAdjusting Print Sensor Position Registration Sensor AdjustmentSquaring the Print Head Print Head Tangent PointSensor Trim Pots Cleaning Print SensorHole / Slot Index Registration Sensor DIP Switch Bank LightsFilm Out Sensor / Top Ink Sensor Reflective Index Registration SensorBottom Ink Sensor TP8Knife Square Adjustment Stock out AdjustmentHeadlift Sensor Full Stacker Sensor Jam SensorStock Feed Adjustment Stacker AdjustmentsMechanical Adjustment of Stock Sense Mark Light Receiver Mechanical Adjustment Of Feed Roller Pressure Blue RollerAdjustment Procedure GeneralPage Electrical Connections Machine WiringRelay Assembly Electrical System Schematic Motherboard Power Connectors Power Up / Sign On / Communications Electrical Trouble ShootingProblem Probable Cause Corrective Action Stock / Ink Advance Problem Probable Cause Corrective Action Print Problem Probable Cause Corrective Action Cut / Stack Electrical Trouble Shooting / Machine Set Up Sequence Stock Mechanical Trouble ShootingProblem Probable Cause Corrective Action Ink Print Knife Problem Probable Cause Corrective ActionTCB Lubrication Procedure Mechanical Trouble Shooting SequenceCam Lubrication Procedure Composition Iglide BearingsAppendix a Error MessagesThermal Control Board P/N Software Upgrade Chip Placement PositionsAppendix B Head Driver Board P/N Diskless Rom Board P/NFront Panel Board P/N Ink and Stock Transfer Types Appendix CValue Transfer Type Value Transfer Type Knife MFG Guideline Appendix DAppendix D Appendix D Page Assembly Drawings Unwind Assembly Drawing Description Qty Unwind Parts ListWeb Guide / Light Bar Assembly Drawing Web Guide / Light Bar Parts List Drive Assembly Drawing Drive Parts List Printhead Assembly Drawing Printhead Parts List Ink Unwind / Rewind Assembly Ink Unwind / Rewind Parts List Field Retrofit Kit Ink Rewind Arbor AssemblyInk Rewind Arbor Parts List Feed & Ink Drive Assembly Feed & Ink Drive Parts List Timing Belt Threading Diagram Timing Belt Parts List Ink Turn Roller Assembly Ink Turn Roller Parts List Knife Assembly Drawing Part Qty Description Number Knife Parts ListStacker Assembly Drawing Stacker Parts List Rewind Assembly Drawing Rewind Parts List Stock Out Sensor Assembly Drawing Part Qty Description Number Stock Out Sensor Parts ListOptional Stackers Stacker Specifications Optional 4.25 Pick-up Assembly Optional 4.25 Pick-up Parts List Optional 4.25 Stacker Assembly Optional 4.25 Stacker Parts List Optional Down Stacker Assembly Drawing Part Optional Down Stacker Parts List Part Optional Down Stacker Assembly Drawing Part Rear Support Stacker Optional Down Stacker Assembly Drawing Part #8 Thumb Screw Cap