Paxar 656 / 636 user manual Electrical Trouble Shooting, Power Up / Sign On / Communications

Page 51

Electrical Trouble Shooting

Power Up / Sign On / Communications

Problem

Probable Cause

Corrective Action

 

 

 

Machine fails to power up with no

1) Incorrect power amplitude.

1) Confirm that the AC entry is

light present in the AC power

 

configured for the line voltage

switch.

 

intended to be applied to the

 

 

machine. Failure to do so can

 

 

damage the machine's internal

 

 

power supply. Refer to the "Fuse

 

 

Configuration".

 

 

 

 

2) Lack of power to machine.

2) Check that both ends of the power

 

 

cord are plugged in securely.

 

 

2A) Confirm that the outlet the

 

 

machine is plugged into has power.

 

 

 

 

3) Missing or blown fuse(s)

3) Check that the fuse(s) located

 

 

inside the AC entry are present and

 

 

intact. Replace as needed. Refer to

 

 

the "Fuse Configuration".

Machine fails to power up with light present in the AC power switch.

1) Unconnected cable / connector

1) Power off and remove the power

inside machine.

cord from the AC entry. Remove

 

the back cover and inspect the

 

cables and connectors to and from

 

the power supply. Refer to the

 

"Electrical System Schematic".

 

 

2) Thermal Control Board unplugged

2) Power off and remove the power

from the Mother Board

cord from the AC entry. Remove

 

the back cover and reseat the

 

Thermal Control Board.

Front panel displays no text or nothing at all.

1) Front panel cable unplugged.

1)Power off and remove the power cord from the AC entry. Remove the back cover and inspect the cable and connectors to and from the front panel. Refer to the "Electrical System Schematic".

Users Manual Model 656/636

Electrical Trouble Shooting • 45

Image 51
Contents Paxar Systems Group Manual Edition February Model 656This page intentionally blank Contents Electrical Connections Assembly Drawings Page Safety Issues / Warnings ScopeIntroduction Parts Warranty InformationLimited Warranty ServiceLocation of Printer Customer ResponsibilityUnpacking AC Power LinePaxar 656 / 636 Tool KIT #351390 Inventory of ComponentsInstalling the Stacker Printer SetupFuse Configuration Board InstallationInstall P.C. Boards as follows Installing the Power Cord TCB Dip Switch S2 SettingsInstalling the PC Software Installing the PC Interface CablePrinter Description Product DescriptionUnit Specification Personal Computer SpecificationsSelfform Installing Ink Ribbon Printer OperationPaxar Field Engineer Must be Present Stock Threading Loading StockButt Splice Web Guide AdjustmentFigure Print Head Open / Closed Print Head Open / CloseFeed Control Panel OperationPrinter Controls StartStop Sensor Indicator LightsError On LinePrint Reports Front Panel Menu FunctionsLCD Display Diagnostic TestsReady for Batches Imager VXX Batch ID QTY Building Image Imager VXXLast Batch WAS Imager VXX Press Enter to Print Last Verifier Scan Print Report ModeDisplay Modes Press Enter for Print ReportsSetup Mode Emulation MODE630 NEW Emulation MODE650 Cutter is Disabled Press Enter to EnableChange the CUT Change Strobe Strobe 0 NEW Strobe +2Press Enter for Life Counts Life Counters ModeTransfer TYPE052 NEW Transfer TYPE000 Press Enter to Print Checkout FormatProtected Mode Press Enter For 2ND Language Change Password 4 Digits NEW WordVerifier is Enabled Press Enter to Disable Change DATE/TIMEMaintenance / Adjustments Print Head HandlingHandling Print Head Cleaning ProcedureSupplies Print Head Replacement Tangent Print Head AdjustmentClean Platen Roller Print Head Pressure SettingPrint Head Tangent Point Registration Sensor AdjustmentAdjusting Print Sensor Position Squaring the Print HeadSensor Trim Pots Cleaning Print SensorHole / Slot Index Registration Sensor DIP Switch Bank LightsTP8 Reflective Index Registration SensorFilm Out Sensor / Top Ink Sensor Bottom Ink SensorFull Stacker Sensor Jam Sensor Stock out AdjustmentKnife Square Adjustment Headlift SensorStock Feed Adjustment Stacker AdjustmentsGeneral Mechanical Adjustment Of Feed Roller Pressure Blue RollerMechanical Adjustment of Stock Sense Mark Light Receiver Adjustment ProcedurePage Electrical Connections Machine WiringRelay Assembly Electrical System Schematic Motherboard Power Connectors Power Up / Sign On / Communications Electrical Trouble ShootingProblem Probable Cause Corrective Action Stock / Ink Advance Problem Probable Cause Corrective Action Print Problem Probable Cause Corrective Action Cut / Stack Electrical Trouble Shooting / Machine Set Up Sequence Stock Mechanical Trouble ShootingProblem Probable Cause Corrective Action Ink Print Knife Problem Probable Cause Corrective ActionTCB Composition Iglide Bearings Mechanical Trouble Shooting SequenceLubrication Procedure Cam Lubrication ProcedureAppendix a Error MessagesSoftware Upgrade Chip Placement Positions Appendix BThermal Control Board P/N Head Driver Board P/N Diskless Rom Board P/NFront Panel Board P/N Ink and Stock Transfer Types Appendix CValue Transfer Type Value Transfer Type Knife MFG Guideline Appendix DAppendix D Appendix D Page Assembly Drawings Unwind Assembly Drawing Description Qty Unwind Parts ListWeb Guide / Light Bar Assembly Drawing Web Guide / Light Bar Parts List Drive Assembly Drawing Drive Parts List Printhead Assembly Drawing Printhead Parts List Ink Unwind / Rewind Assembly Ink Unwind / Rewind Parts List Field Retrofit Kit Ink Rewind Arbor AssemblyInk Rewind Arbor Parts List Feed & Ink Drive Assembly Feed & Ink Drive Parts List Timing Belt Threading Diagram Timing Belt Parts List Ink Turn Roller Assembly Ink Turn Roller Parts List Knife Assembly Drawing Part Qty Description Number Knife Parts ListStacker Assembly Drawing Stacker Parts List Rewind Assembly Drawing Rewind Parts List Stock Out Sensor Assembly Drawing Part Qty Description Number Stock Out Sensor Parts ListOptional Stackers Stacker Specifications Optional 4.25 Pick-up Assembly Optional 4.25 Pick-up Parts List Optional 4.25 Stacker Assembly Optional 4.25 Stacker Parts List Optional Down Stacker Assembly Drawing Part Optional Down Stacker Parts List Part Optional Down Stacker Assembly Drawing Part Rear Support Stacker Optional Down Stacker Assembly Drawing Part #8 Thumb Screw Cap