Revision History
Issue 1
Issue 2
Issue 3
Issue 4
Issue 5
Version 1.02 |
| 3rd November 2004 | Initial version |
Version 1.05 | 17th February 2005 |
| |
Version 1.10 |
| 21st July 2005 |
|
Version 1.12 |
| 2nd September 2005 |
|
Version 1.19 |
| 26th July 2006 | Changes for V1.2 PCB / hardware revision |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer
Under no circumstances will iQuest (NZ) Ltd be liable or responsible for any consequential damage or loss that may arise from the use of this product.
All examples and diagrams shown in this manual and any supplied software examples are intended as a guide to understanding this product, not to guarantee operation. iQuest (NZ) Ltd accepts no responsibility for use of this product based on this information or these examples.
Owing to the wide variety of possible applications of this product, you must satisfy yourself as to its suitability to your specific application.
© 2006, iQuest (NZ) Ltd All rights reserved.
This publication, or any part of it, and any software accompanying it may not be copied, photocopied, reproduced, translated or communicated to any third party, or reduced to electronic medium without prior written permission from iQuest (NZ) Ltd.
iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7