23 - iRIS 220 / iRIS 320, V1.19 User Guide
4.3 Terminal Menus
4.3.1 Main Menu (Level 1)
Throughout the terminal menus, there are
∙Menu option 0 (zero) always returns you to the level above your current position.
∙Entering “r” or “R” for a menu option will refresh the menu without selecting anything. This can be useful over a UDP terminal session where it is possible a packet may be lost and you are unsure which menu is currently selected.
When a terminal session has been established with the iRIS through the RS232 port or UDP socket A, you will be presented with the main menu. To make a menu selection, type a number followed by <Enter>. Invalid menu selections will result in the display of an error message on the terminal. The current value of each settable item is enclosed in square braces e.g. [1234].
Level1 | Level2 | Level3 | Level4 | Level5 |
Main Menu
Comms Cfg
IP Acceptance Cfg
Schedule Cfg
Network Info
Phone List
Sensor Selection
Sensor Cfg
Alarm Selection
Alarm Cfg
Output Selection
Output Cfg
Date/Time Cfg
Miscellaneous
Voice
Figure 12 – Terminal Menu Structure
NOTE: All configuration examples shown in the following sections are for a GPRS version iRIS320V.