iRIS 220 / iRIS 320, V1.19 User Guide - 48
Total 2 Screen 2/2 (Level 3)
TOTAL 2/2
Yst 76.5
Day 26.4
Run 11276.3
+/- | Move forwards/backwards through sensor total screens |
Enter | Drill down to Total Reset screen |
Alt Enter | Move up to Main Menu screen |
Reset Total Screen (Level 4)
The Total Reset screen is used to reset the daily and running totals.
RESET TOTAL
↵initiate
Enter | Reset total and move up to Sensor Total screen |
Alt Enter | Move up to Sensor Total screen |
NOTE: The two pulse counters' totalisers operate continually, irrespective of whether or not they are configured as a source for any of the sensors.
5.2.8 Comms Related Screens
Comms Status Screen (Level 3)
The Comms Status screen displays the current state of the
COMMS STATUS
On Line
Connected
RSSI: 23,00
Enter | Move down to Comms Menu screen |
Alt Enter | Move up to Main Menu screen |
Comms Menu Screen (Level 4)
The comms menu screen is used to select communication options.
COMMS MENU >Settings Enable Test
+/- | Move down/up through menu |
Enter | Select menu item |
Alt Enter | Move up to Comms Status screen |
Comms Setting Screen 1/8 - Protocol (Level 5)
The
GPRS/CDMA 1/8
PROTOCOL
Addr 123
Auto Send
+/- | Move forwards/backwards through communication setting screens. |
Alt Enter | Move up to Comms Status screen |
48 | iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 |