SUPER
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table on the right for pin definitions.
Reset
The Reset connection is located on pins 3 and 4 of JF1. Attach it to the hardware reset switch on the computer case. Refer to the table on the right for pin defini- tions.
Power Fail LED Pin
Definitions
(JF1)
Pin
Number Definition
5Control
6GND
Reset Pin
Definitions
(JF1)
Pin
Number Definition
3Reset
4Ground
PWR_ON
The PWR_ON connection is lo- cated on pins 1 and 2 of JF1. Mo- mentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend button (see the Power Button Mode setting in BIOS). To turn off the power when set to suspend mode, de- press the button for at least 4 seconds. Refer to the table on the right for pin definitions.
Universal Serial Bus (USB0/1)
Two Universal Serial Bus ports are located beside the keyboard/ mouse ports. USB0 is the bottom connector and USB1 is the top connector. See the table on the right for pin definitions.
PWR_ON Connector
Pin Definitions
(JF1)
Pin
Number Definition
1PW _O N
2Ground
Universal Serial Bus Pin Definitions
| USB0 |
| USB1 | |
Pin |
| Pin |
|
|
Number | Definition | Number | Definition | |
1 | +5V | 1 |
| +5V |
2 | P0- | 2 |
| P0- |
3 | P0+ | 3 |
| P0+ |
4 | Ground | 4 |
| Ground |
5 | N/A | 5 |
| Key |
|
|
|
|
|