Chapter 4: AMIBIOS
allows the computer to force a third party BIOS to display during system boot. Keep Current has the system display AMIBIOS information on bootup.
BootUp Num Lock
This option is used to select the status of the Number Lock function on your keyboard on bootup. The settings are On and Off.
BootUp CPU Speed
This option is used set the CPU speed to either High or Low.
PS/2 Mouse Support
This option specifies whether a PS/2 Mouse will be supported. Settings are Enabled and Disabled.
Typematic Rate
Set this option to select the rate at which the computer repeats a key that is held down. Settings are Fast and Slow. Fast: This sets the rate the computer repeats a key to over 20 times per second. Under normal opera- tions, this setting should not be changed. Slow: This sets the rate the computer repeats a key to under 8 times per second.
Primary Display
This option specifies the type of monitor display you have installed on the system. The settings are Absent, VGA/EGA, Color 40 x 25, Color 80 x 25 and monochrome.
Parity Check
Use this option to either Enable or Disable the use of memory parity check- ing.
Boot to OS/2
This option can be used to boot the system to an OS/2 operating system. The settings are No and Yes.