SUPER MICRO Computer 6113L-8, 6113L-i Connecting AC Power, CPUs 2 with Heatsinks Installed

SUPERSERVER 6113L-8/6113L-i User's Manual

3.Secure the heatsink onto the CPU by tightening all four screws.

4.Repeat the above steps to install a second heatsink on a second CPU if needed.

Figure 5-3. CPUs (2) with Heatsinks Installed

Connecting AC Power

1.Connect the 24-pin power connector from the AC power supply to the serverboard. See the serverboard layout diagram in this chapter for the locations of the power connectors.

2.Connect the two (2) 4-pin 12V power connectors from the AC power supply to the power pods.

3.Refer to the next section for details on all connections.

5-8