SUPER MICRO Computer 6113L-i, 6113L-8 user manual Installing the Heatsink Retention Mechanism

Chapter 5: Advanced Serverboard Setup

Installing the Heatsink Retention Mechanism

1.Place the retention mechanism (SKT-0147-RM-IT2) on the serverboard as shown in the picture below:

2.Secure the retention mechanism to the serverboard by screwing three 6-32,

4.5-mm screws into the mounting holes on the back of the serverboard.

Figure 5-1. Installing Heatsink Retention Mechanism

1.) Place the retention mechanism on the serverboard.

2.) Screw in three 6-32

4.5-mm screws from the reverse side of the serverboard.

5-3