Western Telematic IPS-15 manual QuickStart, For Optional Satellite Units Only

Page 13

Section3:QuickStart

For Optional Satellite Units Only

Steps 8 through 13 apply only to installations that include optional IPS Satellite Units. If your installation does not include satellite units, please skip steps 8 through 13.

8.Link Port (Optional): An RJ-11 jack, which is used to link IPS Satellite units to the IPS Master Unit.

Note: The IPS-15 Master Unit and Satellite Units should not be placed more than 100 feet apart.

9.RJ-11 Cable (Optional): Use standard, straight wired, six conductor RJ-11 cable, such as WTI's AC-10, AC-15 or AC-25 cables. For a description of straight wired RJ11 cables, please refer to Appendix A.2.

10.Satellite Unit Link Ports (Optional): A pair of RJ-11 Jacks, which are used to connect the Satellite unit to the IPS Master Unit. If additional Satellite units are to be installed, the Link Port is also used to connect to the next Satellite unit in the chain.

11.Connect Switched Device to Satellite Unit (Optional): Connect the power cable from your switched device to the Switched AC Outlet on the Satellite Unit's back panel.

12.Satellite Unit Power Inlet (Optional): Use the supplied power cord to connect the Satellite unit to an appropriate power source. Make certain to observe the safety warning listed in Section 4.1.

13.RJ-11 Cable to Link Additional Satellite Units (Optional): If your installation will include more than one Satellite unit, repeat items 8 through 12 above for each of the remaining Satellite Units.

3-3

Image 13

Contents WTIPartNo.13301Rev.B Page Table of Contents List of Figures IPSInternetPowerSwitchUsersGuideIntroduction Intelligent Power ControlTypographic Conventions Easy to Configure, Easy to UseMaster Main Unit Unit DescriptionMaster Unit Front Panel IPS-15 Master Unit Back Panel Master Unit Back PanelSatellite Unit Front Panel Optional Satellite UnitIPS-15 Satellite Unit Back Panel Satellite Unit Back PanelQuick Start Hardware InstallationConnections Diagram For Optional Satellite Units Only QuickStartWeb Browser Interface Communicating with the IPS-15QuickStart Text Interface $ telnet 192.168.168.168 Enter IPSInternetPowerSwitchUsersGuide Power Supply Connection InstallationConnection to Switched Outlets Connecting a Local PC Connecting the Network CableConnecting an External Modem Console Port ConnectionConnecting Optional IPS Satellite Units InstallationIPSInternetPowerSwitchUsersGuide System Mode and User Mode ConfigurationCommunicating with the IPS Accessing the Web Browser InterfaceAccessing the Text Interface ConfigurationPlug Status Screen Text Interface General Parameters Menus Configuration MenusGeneral Parameters Menu Web Browser Interface 9InactivityTimeout5. ConfirmationMin IPSInternetPowerSwitchUsersGuide Plug Parameters Menu Text Interface Plug Parameters MenusNetwork Parameters Menus Network Parameters Menu Text Interface IP Security Feature Telnet Parameters Menus Permit11 Telnet Parameters Menu Text Interface Web Server Parameters Menus13 Web Browser Parameters Menu Text Interface Save Configuration Parameters Plug Numbers and Plug Zones OperationPlug Status Screen Web Browser Interface Operation via the Web Browser InterfaceOperation Operation via the Text Interface Boot/On/Off Commands Text InterfacePlug Status Screen Text Interface Boot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Interface Descriptions Straight Wired RJ11 CablesConsole Port Interface Ordering Information SpecificationsApx-3 Customer ServiceTrademark and Copyright Information Apx-41to5 IndexBudRate 464Cables NetwrkPortAccess 3-1,.534-2,5-5124