Western Telematic IPS-15 manual QuickStart

Page 15

Section3:QuickStart

Figure 3.2: The IPS Plug Status Screen, Web Interface

3.Test Switching Functions: When the IPS-15 is powered up, the Switched AC Outlet will be set in the ON position. To test On/Off/Reboot functions, proceed as follows:

a)Reboot Outlet: Click on the "Boot" radio button for Plug one. Next, click the "Apply" button. The IPS will display a screen indicating that the reboot operation is in progress, then return to the Plug Status Screen. Plug 1 should now be in the "On" position.

b)Switch Outlet Off: Click the "Off" radio button for Plug one. Next, click the "Apply" button; the IPS will display a screen indicating that the switch operation is in progress, then return to the Plug Status Screen. Note that the Status Indicator for Plug One now indicates that the plug is switched "Off."

c)Switch Outlet On: Click the "On" radio button for Plug One. Next, click the "Apply" button, the IPS will display a screen indicating that the switch operation is in progress, then return to the Plug Status Screen. Note that

the Status Indicator for Plug One now shows that the plug

is switched "On."

3-5

Image 15

Contents WTIPartNo.13301Rev.B Page Table of Contents List of Figures IPSInternetPowerSwitchUsersGuideIntroduction Intelligent Power ControlTypographic Conventions Easy to Configure, Easy to UseUnit Description Master Main UnitMaster Unit Front Panel IPS-15 Master Unit Back Panel Master Unit Back PanelSatellite Unit Front Panel Optional Satellite UnitIPS-15 Satellite Unit Back Panel Satellite Unit Back PanelQuick Start Hardware InstallationConnections Diagram For Optional Satellite Units Only QuickStartWeb Browser Interface Communicating with the IPS-15QuickStart Text Interface $ telnet 192.168.168.168 Enter IPSInternetPowerSwitchUsersGuide Installation Power Supply ConnectionConnection to Switched Outlets Console Port Connection Connecting the Network CableConnecting a Local PC Connecting an External ModemConnecting Optional IPS Satellite Units InstallationIPSInternetPowerSwitchUsersGuide System Mode and User Mode ConfigurationCommunicating with the IPS Accessing the Web Browser InterfaceAccessing the Text Interface ConfigurationPlug Status Screen Text Interface General Parameters Menus Configuration MenusGeneral Parameters Menu Web Browser Interface 9InactivityTimeout5. ConfirmationMin IPSInternetPowerSwitchUsersGuide Plug Parameters Menu Text Interface Plug Parameters MenusNetwork Parameters Menus Network Parameters Menu Text Interface IP Security Feature Telnet Parameters Menus Permit11 Telnet Parameters Menu Text Interface Web Server Parameters Menus13 Web Browser Parameters Menu Text Interface Save Configuration Parameters Plug Numbers and Plug Zones OperationPlug Status Screen Web Browser Interface Operation via the Web Browser InterfaceOperation Boot/On/Off Commands Text Interface Operation via the Text InterfacePlug Status Screen Text Interface Boot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Straight Wired RJ11 Cables Interface DescriptionsConsole Port Interface Ordering Information SpecificationsApx-3 Customer ServiceTrademark and Copyright Information Apx-4464 Index1to5 BudRateCables NetwrkPortAccess 3-1,.534-2,5-5124