IPSInternetPowerSwitch;User'sGuide
Please note that the major difference between the Web Browser Interface and Text Interface in this case, is that the Web Interface allows you to select parameters for all five plugs/zones from a single menu, where as the Text Interface includes a separate menu for each plug/zone. The Plug Parameters Menu allows the following parameters to be defined:
Name: Assigns a name to the plug. (Up to 32 Characters, Default = undefined.)
Boot Delay: During a Boot Cycle, power to the outlet is switched off and then switched back on. The Boot Delay is the amount of time that elapses between power off and power on. (Default = 5 Seconds.)
5.3.3.Network Parameters Menus
The Network Parameters Menus are used to select the IP Address and other network parameters.
Web Browser Interface: Click the "Setup" button to access the Setup Menus, and then click the "Network Parameters" button. The Web Parameters Menu will be displayed as shown in Figure 5.7
Text Interface: Type /N and press [Enter]. The Network Parameters Menu will be displayed as shown in Figure 5.8.
Notes:
Although both the Web Browser Interface and Text Interface both allow configuration of the same network parameters, note that when parameters are defined via the Text Interface, the IP Security feature is configured via a separate submenu. For more information on IP Security, please refer to
Section 5.3.3.1.
Settings for network parameters depend on the configuration of your individual network. Contact your network administrator for appropriate settings.
The Network Parameters Menu allows the following parameters to be defined. Except where noted, all parameters listed here are available via both the Web Browser Interface and the Text Interface.
IP Address: Defines the IP address for the IPS unit. (Default = 192.168.168.168.)
Subnet Mask: Defines the Subnet Mask for the IPS unit.