Section6:Operation
To invoke On/Off/Boot commands or view plug status via the Web Browser Interface, proceed as follows:
1.Access the
2.When the Plug Status Screen (Figure 6.1) appears, note that the screen includes a status field and On/Off/Boot controls for every satellite unit that was connected at the time that the master unit was powered up.
3.Switching Plugs On: To switch one or more plugs On click the "On" radio button next to the desired plug(s), and then click on the "Apply" button.
a)To switch all Plugs On, click on the "On" radio button in the "All Plugs" line, and then Click "Apply."
b)The IPS will display a screen which indicates that the switching operation is in progress, and then return to the updated Plug Status Screen (which should now show the selected plugs in the On position.)
4.Switching Plugs Off: To switch one or more plugs Off, click the "Off" radio button next to the desired plug(s), and then click on the "Apply" button.
a)To switch all Plugs Off, click on the "Off" radio button in the "All Plugs" line, and then Click "Apply."
b)The IPS will display a screen which indicates that the switching operation is in progress, and then return to the updated Plug Status Screen (which should now show the selected plugs in the Off position.)
5.Reboot Cycles: To initiate a Reboot Cycle, click on the "Boot" radio button next to the desired plug(s), and then click on the "Apply" Button.
a)To reboot all Plugs, click on the "Boot" button in the "All Plugs" line, and then Click "Apply."
b)The IPS will display a screen which indicates that the Reboot Cycle is in progress, and then return to the Plug Status Screen (which should now show the selected plugs
in the On position.) Note that if different Boot Delay Times have been assigned to each selected Plug, then the Plug Status Screen will not be redisplayed until the
longest defined Boot Delay Time has elapsed. | |
|
|