Western Telematic IPS-15 manual General Parameters Menu Web Browser Interface

IPSInternetPowerSwitch;User'sGuide

Figure 5.3: General Parameters Menu - Web Browser Interface

The General Parameters Menu allows the following parameters to be defined. Please note that, except where indicated, all parameters are available via both the Web Browser Interface and the Text Interface.

￿System Password: The IPS will display a password prompt when you attempt to access the command mode. When the System Password is entered at log on, the System Mode will be active, allowing access to both switching command functions and configuration menus. (16 Characters, Default = undefined.)

Notes:

￿If the System Password is not defined, then the IPS will always start up in System Mode, and configuration functions will then be available to anyone who accesses the Command Mode.

￿When defining passwords via Web Browser Interface, you must re-key the desired password in the "Confirm Password" field. When defining passwords via the Text Interface, the submenu will also ask you for confirmation.

￿User Password: The User Password allows access to all On/Off/Boot command functions, but does not allow access to

5-6configuration menus. (16 Characters, Default = undefined.)