Western Telematic manual IPS-15 Master Unit Back Panel

Page 8

IPSInternetPowerSwitch;User'sGuide

Plug Indicator and Manual Control Button: An On/Off Indicator and Manual Control Button for the Master Unit's switched plug. To manually switch the plug "On" or "Off", press and hold the control button for one second.

Note: If desired, the Manual Control Button can also be disabled, set to control only the plug on the Master Unit, or set to control the Master Unit plus all connected Satellite Units as described in Section 5.3.1.

2.1.2.Master Unit Back Panel

The Back Panel of the IPS-15 Master Unit includes a master power switch, the switched AC outlet, a power inlet, and a circuit breaker as described below.

Figure 2.2: IPS-15 Master Unit - Back Panel

2-2

Master Power Switch: This switch must be "On" in order for the IPS-15 to function. Note that this switch is not used to set the On/Off status of the switched outlets.

Switched AC Outlet: A 115 VAC outlet, that can switch up to 15 Amps. If more than one switched outlet is required, optional IPS-15 Satellite Units can be easily added to provide control of up to 17 outlets.

Power Inlet: A 115 VAC inlet that supplies power for the IPS's command functions and the switched plug.

Circuit Breaker: 115 VAC, 15 Amps.

Image 8

Contents WTIPartNo.13301Rev.B Page Table of Contents IPSInternetPowerSwitchUsersGuide List of FiguresIntelligent Power Control IntroductionEasy to Configure, Easy to Use Typographic ConventionsMaster Unit Front Panel Unit DescriptionMaster Main Unit Master Unit Back Panel IPS-15 Master Unit Back PanelOptional Satellite Unit Satellite Unit Front PanelSatellite Unit Back Panel IPS-15 Satellite Unit Back PanelHardware Installation Quick StartConnections Diagram QuickStart For Optional Satellite Units OnlyCommunicating with the IPS-15 Web Browser InterfaceQuickStart Text Interface $ telnet 192.168.168.168 Enter IPSInternetPowerSwitchUsersGuide Connection to Switched Outlets InstallationPower Supply Connection Connecting the Network Cable Connecting a Local PCConnecting an External Modem Console Port ConnectionInstallation Connecting Optional IPS Satellite UnitsIPSInternetPowerSwitchUsersGuide Configuration System Mode and User ModeAccessing the Web Browser Interface Communicating with the IPSConfiguration Accessing the Text InterfacePlug Status Screen Text Interface Configuration Menus General Parameters MenusGeneral Parameters Menu Web Browser Interface 9InactivityTimeout5. ConfirmationMin IPSInternetPowerSwitchUsersGuide Plug Parameters Menus Plug Parameters Menu Text InterfaceNetwork Parameters Menus Network Parameters Menu Text Interface IP Security Feature Permit Telnet Parameters MenusWeb Server Parameters Menus 11 Telnet Parameters Menu Text Interface13 Web Browser Parameters Menu Text Interface Save Configuration Parameters Operation Plug Numbers and Plug ZonesOperation via the Web Browser Interface Plug Status Screen Web Browser InterfaceOperation Plug Status Screen Text Interface Boot/On/Off Commands Text InterfaceOperation via the Text Interface Boot 1 or /BO Atmswtch Logging Out of Command Mode Applying Commands to Several Plugs Text InterfaceAutomated Mode Manual Operation Saving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Console Port Interface Straight Wired RJ11 CablesInterface Descriptions Specifications Ordering InformationCustomer Service Apx-3Apx-4 Trademark and Copyright InformationIndex 1to5BudRate 464NetwrkPortAccess 3-1,.534-2,5-5124 Cables