Western Telematic IPS-15 manual Automated Mode

Page 45

Section6:Operation

6.5. The Automated Mode

The Automated Mode allows the IPS to execute switching and reboot commands, without displaying menus or generating response messages. Automated Mode is designed to allow the IPS to be controlled by a device which can generate commands to control power switching functions without human intervention.

When the Automated Mode is enabled, the /ON, /OFF, /BOOT, and /X commands are executed without a "Sure?" confirmation prompt and without command response messages; the only reply to these commands is the "IPS>" prompt, which is displayed when the command is complete.

Note that although the Automated Mode can be enabled using either the Web Browser Interface or Text Interface, Automated Mode is designed primarily for users who wish to send ASCII commands to the IPS without operator intervention, and therefore does not specifically apply to a GUI style, Web Browser Interface. When the Automated Mode is enabled, the Web Browser Interface can still be used to invoke On / Off / Boot commands.

Notes:

￿When Automated Mode is enabled, all IPS password security functions are disabled, and users are able to access System Level command functions (including the configuration menus) and control plugs without entering a password.

￿If you need to enable the Automated Mode, but want to restrict network access to IPS configuration menus, it is recommended to enable and configure the IP Security Function as described in Section 5.3.3.1.

To enable/disable the Automated Mode, access the General Parameters menu (see Section 5.3.1) and then set the "Automated Mode" option to the "On" state. When the Automated Mode is enabled, IPS functions will change as follows:

1.All Password Security Suppressed: When a user attempts to access the command mode, the password prompt will not be displayed at either the Console Port or Network Port. Unless specifically restricted by the IP Security Function, all users will be allowed to access both switching and configuration functions, and all commands will be immediately accepted

without the requirement to enter a password.

6-7

 

 

Image 45
Contents WTIPartNo.13301Rev.B Page Table of Contents List of Figures IPSInternetPowerSwitchUsersGuideIntroduction Intelligent Power ControlTypographic Conventions Easy to Configure, Easy to UseUnit Description Master Main UnitMaster Unit Front Panel IPS-15 Master Unit Back Panel Master Unit Back PanelSatellite Unit Front Panel Optional Satellite UnitIPS-15 Satellite Unit Back Panel Satellite Unit Back PanelQuick Start Hardware InstallationConnections Diagram For Optional Satellite Units Only QuickStartWeb Browser Interface Communicating with the IPS-15QuickStart Text Interface $ telnet 192.168.168.168 Enter IPSInternetPowerSwitchUsersGuide Installation Power Supply ConnectionConnection to Switched Outlets Connecting a Local PC Connecting the Network CableConnecting an External Modem Console Port ConnectionConnecting Optional IPS Satellite Units InstallationIPSInternetPowerSwitchUsersGuide System Mode and User Mode ConfigurationCommunicating with the IPS Accessing the Web Browser InterfaceAccessing the Text Interface ConfigurationPlug Status Screen Text Interface General Parameters Menus Configuration MenusGeneral Parameters Menu Web Browser Interface 9InactivityTimeout5. ConfirmationMin IPSInternetPowerSwitchUsersGuide Plug Parameters Menu Text Interface Plug Parameters MenusNetwork Parameters Menus Network Parameters Menu Text Interface IP Security Feature Telnet Parameters Menus Permit11 Telnet Parameters Menu Text Interface Web Server Parameters Menus13 Web Browser Parameters Menu Text Interface Save Configuration Parameters Plug Numbers and Plug Zones OperationPlug Status Screen Web Browser Interface Operation via the Web Browser InterfaceOperation Boot/On/Off Commands Text Interface Operation via the Text InterfacePlug Status Screen Text Interface Boot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Straight Wired RJ11 Cables Interface DescriptionsConsole Port Interface Ordering Information SpecificationsApx-3 Customer ServiceTrademark and Copyright Information Apx-41to5 IndexBudRate 464Cables NetwrkPortAccess 3-1,.534-2,5-5124