Western Telematic IPS-15 manual Boot 1 or /BO Atmswtch

Internet/SN/HDisplay/On<n>/BootControl/Off/X+------------------------------------[n]<n><n>=optionalPowerBootTurnDisplayExit/DisconnectSwitchPlugOffOnplugPlugNetworkHelpv1name.StatusScreen00orStatusnumberSiteID:+/UWestern/N/P[n]/G/DL/RUtilitiesConfiguration/E/W/TTelematicUpgradeView/SetDownloadRecallSaveResetParametersDemoNetworkFirmwareSectionNetworkPlugGeneralWebServerParametersInterface6:OperationtoFile

<n>requiredn+norn:nplug*,ybypass"Sure?(y/n)"allplugs=plugthroughwithaccessandplugplugn +IPS>------------------------------------+

Figure 6.3: The IPS-15 Help Screen - Text Interface

To Switch Plugs, or initiate a Boot Cycle, proceed as follows:

1.Switch Plug(s) On: To power-on a plug, type /ON n and press [Enter]. Where "n" is the number or name of the desired plug or "zone." For example:

/ON 1 or /ON ROUTER

2.Switch Plug(s) Off: To power-off a plug, type /OFF n and press [Enter]. Where "n" is the number or name of the desired plug or "zone." Note that the "/OFF" command can also be entered as "/OF". For example:

/OFF 2 or /OF ROUTER

3.Boot Plug(s): To initiate a Boot cycle, type /BOOT n and press [Enter]. Where "n" is a the number or name of the desired plug or "zone." Note that the "/BOOT" command can also be entered as "/BO". For example:

/BOOT 1 or /BO ATMSWTCH

4.Suppress Command Confirmation Prompt: To execute a Boot/On/Off command without displaying the "Sure?" prompt, include the ",Y" option in the command line. The ",Y" option is entered immediately following the command argument. For example:

/ON ROUTER,Y or /BOOT 2,Y 6-5