Western Telematic IPS-15 manual Unit Description, Master Main Unit, Master Unit Front Panel

2. Unit Description

2.1. The Master (Main) Unit

2.1.1.Master Unit Front Panel

As shown in Figure 2.1, the front panel of the IPS-15 Master Unit includes connectors, LEDs and a manual control button.

Figure 2.1: IPS-15 Master Unit - Front Panel

￿Link Port: An RJ-11 port, used to connect the IPS-15 Master Unit to the optional Satellite Unit(s). For more information, please refer to Section 4.5.

￿Console Port: A DB9, RS232 serial port (DTE), for connection to a local terminal or external modem, as described in Section 4.3.

￿Network Port: An RJ45 Ethernet Port for connection to your TCP/IP network. The default IP Address is 192.168.168.168, for more information, please refer to Section 5.3.1 and Section 4.4.

￿ACT Indicator: Flashes to indicate activity at the Network Port.

￿PWR Indicator: Lights when Power is Applied to the Master Unit. Note that this LED does not indicate the On/Off status of the Master Unit's switched AC outlet.

￿RDY Indicator: Flashes when the IPS-15 Master Unit is

ready to receive commands. 2-1