Western Telematic RPC-4840N manual Displaying circuit Status, Hfor Dischelp mrmaio

RPC-4840NRemotePowerController;User'sGuide

6.2. Displaying circuit Status

The Status Screen displays the On/Off state and selected parameters for the switched circuits. To display the Status Screen, type /S and press [Enter]. Note that although the /S command is available in both User and System Mode, the System Status Screen includes more information than the User Status Screen.

When the System Mode is active, the /S command will produce the screen shown in Figure 6.1, which lists status and parameters for both circuits, along with Console Port parameters, and modem command strings. Note that in System Mode, the /S command will also accept an argument which will display the

Us r Passwo d for each circuit. To display circuit passwords,
access the System Mode, type /SP and press [Enter].
"/H"forDischelpmrmaio.	ffStatus	Password
When the User Mode is active,		he /S command produces

different version of the status screen, which lists the status and paramet rs only for the circuit(s) owned by the User password en red at login. If a parate User Password is assigned to the other rcuit, the User Mode Status Screen ll not list the status

-----Remote21CktMdemAutomatDiscoCommandfor.+th------------------icaInitePowrNam(undefined)EhConf.Tmeoucde:String:Controllerv2rcSet:it.ngs:In+ON5sec(undefined)User---------9600,N,8,1O2(undefined)ATEM0Q1&C1&D2S0=1.0Site:WESTERNMinmode,+------------BootpasswordsDlay+------------------TELEMATIC,INCcannotbe.displayed+---------ONDefault+.

FigureRPC>6.1:SystemStatusScreen(PasswordsHidden)

6-2