Western Telematic RPC-4840N manual Saving and Restoring Configuration Parameters

Page 39

7.Saving and Restoring Configuration Parameters

After the RPC-4840N has been properly configured, parameters can be downloaded and saved as an ASCII text file. Later, if the configuration is accidentally altered, the file with the saved parameters can be uploaded to automatically reconfigure the unit without the need to manually assign each parameter.

Saved parameters can also be uploaded to other RPC-4840N units. This allows rapid set-up when several units will be configured with the same parameters.

The "Save Parameters" procedure can be performed from any terminal emulation program (e.g. ProComm, Crosstalk, Hyperterminal, etc.), which allows downloading of ASCII files.

7.1.Sending Parameters to a File

1.Start your communications program and access the RPC command mode using the System Level Password.

2.When the RPC> command prompt appears, type /DL and press [Enter]. The RPC will prompt you to prepare your communications program. Set up your communications program to receive an ASCII download, and specify a name for the file that will receive the saved parameters (e.g. RPC.PAR).

3.When the communications program is ready to receive the file, return to the RPC command mode, and press [Enter] to proceed.

4.The RPC-4840N will send a series of ASCII command lines which specify the currently selected parameters.

7-1

Page 38 Page 40
Image 39
Page 38 Page 40
Contents WTIPartNo.Rev13224.A Page Rack Mount Installation Nameplate Power WarningVentilation Disconnect Power7iii-2 Curiy ServiceIntroduction Intelligent Power ControlTypographic Conventions FeaturesUnit Description Front PanelBack Panel 2BackPanel Quick Start Guide Page QuickStartGuide RPC-4840NRemotePowerControllerUsersGuide Power Connection InstallationDisconnect Timeout Option SwitchesReset Unit to Defaults Default Button / Reset Button LocalDefault Parameters Option Connecting an External Modem Connecting the Network CableConsole Port Connection System Mode and User Mode ConfigurationCommunicating with the RPC-4840N Ckt Defining General Parameters Command/Menu ConventionsOff RPC-4840NRemotePowerControllerUsersGuide Circuit Parameters Configuration4CircuitParametersMenuCircuit1Shown Network Parameters UndefinedImplementing IP Security Configuration Save Configuration Parameters Operation Access the Command ModeHfor Dischelp mrmaio Displaying circuit StatusOperation Boot/On/Off CommandsOFF POWER2 or /OF POWER2 and press Enter Automated Mode Default CommandRPC-4840NRemotePowerControllerUsersGuide Exit / Disconnect Other CommandsLogin as Different User Reset Network PortOperating Tips Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Interface Descriptions Console Port InterfaceModem Port Interface Physical / Environmental Operating Temperature 0C to 45C SpecificationsTrademark and Copyright Information Customer ServiceApx-4 10BaseT100BaseT........#.........2-1,4-4 IndexSystemPassword
Related manuals
Manual 2 pages 23.95 Kb
Top Page Image Contents