Wayne-Dalton WDSF-10 Installation/Setup, Install USB Adapter and USB stand into computer USB port

Page 6

Installing ThinkEssentials®

Use this procedure to install the ThinkEssentials® software on your Personal Computer.

1.Insert the ThinkEssentials® CD into your Windows XP, Vista, or newer computer.

2.The installer program should run automatically. If the program does not start, double-click SETUP.EXE found on the CD.

3.Follow the instructions provided by the installer program. Once complete, a shortcut to the ThinkEssentials® program will be placed in your Start menu.

4.Your CD contains additional information which can be found by browsing to the CD folders.

Note: Do not lose the CD jacket. Located on the jacket is the license key which will be needed in later set-up steps.

Installing the USB Z-Wave®Adapter

Use the following procedure to install the Wayne-Dalton USB Z-Wave®Adapter to your Personal Computer. ThinkEssentials® requires the USB Z-Wave®Adapter to communicate with a Z-Wave®network.

1.Plug the USB Z-Wave®Adapter into the supplied USB extension cable with stand.

2.Plug the USB extension cable with stand into an available USB port on your Personal Computer and place the stand in an open area away from walls or other dense materials or metal, for best performance.

Optionally, you may plug the USB Z-Wave®Adapter directly into a USB port on your computer, although this may reduce performance and range.

				ls
				ia
				t
				n
			e
		s
	s
E			D
k			D
in	C
h
T

			Y
		A
	R
DT
C

Install USB Adapter and USB stand into computer USB port.

Installation/Setup

6

Image 6

Contents Package Contents USB Z-Wave Adapter USB Stand Software on CD Home Control BasicsTable of Contents Basics Copy See ReplicateBasics Basics 143 Screen Layout InformationNumber below corresponds to the bubble number above Installation/Setup Install USB Adapter and USB stand into computer USB portNext Use Change Location link to set your physical locationAdding Modules to the Network Press ADD Device to add a Z-WavemoduleHide Pane Button or Design tab to reveal the icon Operation Common Operations Again Drawing Floor PlanButton in the Design pane. This ErasePress Remove Device to remove a Z-Wavemodule Remove/Replace Broken Modules To remove the module fromRight-click and select Remove Broken Device Operations Use the following procedure to lock/unlock ThinkEssentialsLocked mode the software Locking/Unlocking ThinkEssentialsScenes/Zones To include modules into this scene Modifying Scenes/Zones Remove Zone option respectivelySchedules Select Scene/Zone and Action desired  ActivatedPages LinkModify the desired fields per Instructions in the section ItemsNetwork Operations Joining ThinkEssentials to Existing NetworksExample Primary ControllerInitiate Primary Controller to Send Replication Adding a Controller To the network Secondary ControllerPress ADD Device to add a secondary controller Device removed successfully message window Updating Secondary Controllers Advanced Operations Optimize/Repair NetworkPolling Example Portable Controller Transfer Primary Role From ThinkessentialsInitiate Transfer in ThinkEssentials Confirmation of successful transferTransfer Primary Role To Thinkessentials On Settings tab, select Switch to or JoinController Shift command CONTROLLER, or Controller ShiftBackup Network Settings ConfigurationBackup file Restore commandClick the Backup or Restore Network Settings link Wayne-Dalton USB Z-WaveSection on the Settings tab Located. Note The default parent directory isCommand line window Before you begin, you must ExitAdding Command Line Option to ThinkEssentials Shortcut Start ThinkEssentials using the ThinkEssentials iconModify the Target , then click on APPLY, then OK Type in the /multi command line option Command Line Option Multiple Z-WaveUSB AdaptersInitiate command line function ThinkEssentials /multiInitiate command line function Shortcuts Press F5 to refresh and poll the networkExiting/Closing To reset the USB Z-Wave Adapter Factory ResetResetting Thinkessentials Again On the Settings tab, click on the Reset linkTroubleshooting Then select the module again It is enabled on the desired days of weekIf the modules’s icon is covered by a red Some modules do not supportSwitched on Set up your network againCheck to make sure that there is power Controller to my network. Now, neitherCompliance US and Foreign Patents pending