UNICOM Electric SmartGST-2402M manual Change Password, Port Configuration

Page 18

UNICOM

SmartGST-2402M

4-3-1-4. Change Password

Use this page to change Web Management user password.

4-3-2. Port Configuration

This page can change all port statuses and configure the trunk group.

Press the TAB key to select an item to configure and press SPACE to make a change.

1.State: Current port status. The port can be set to disable or enable mode. If the port setting is disable then it will not receive or transmit any packets.

2.Negotiation: Current auto negotiation setting status of each port.

3.Speed/Duplex: User can set each port for link speed and duplex mode.

4.FC / BP: User can set flow control function to enable or disable. FC (Flow control for full duplex link mode), BP (Backpressure for half duplex mode)

5.Bandwidth In/ Out: For per port packet transmission rate control. Per port level is 100Kbps. It supports individual control method of TX and RX.

6.Priority: Set port to high or low priority.

7.Security: Enable or disable port security function.

17

Image 18

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionDesktop Installation Rear PanelAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceMain Menu Main MenuStatus and Counters Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsEdit Community Name Community StringsAdd Community Name Press Add Edit keyDelete Community Name Trap ManagersDelete trap manager Press Space to choose Enabled / DisabledAdd the trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom Administrator Port StatisticsIP Address Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI