UNICOM Electric SmartGST-2402M manual Restore Tftp Configuration

Page 45

www.unicomlink.com

UNICOM

8. Restart switch.

4-5-3-2. Restore TFTP Configuration

This page shows how to restore the EEPROM value and save an image file from a TFTP server.

1.Start the TFTP server.

2.Press <Edit> on this page.

3.TFTP Server IP: Type the IP of TFTP server.

4.Restore File Name: Type the image file name.

5.Press “ESC” to go to the action line.

6.Press the <Save> key. The image file will start to download.

7.Restart switch.

44

Image 45

Contents Introduction FeaturesSmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching TechnologyStatus Description PowerDesktop Installation Rear PanelAttaching Rubber Feet Attach mounting brackets with screws Rack-mounted InstallationSmall Workgroup Power OnSmall Workgroup Application Segment BridgeLogin in the Console Interface Connecting to the SwitchMain Menu Main MenuStatus and Counters Port Counters Port StatusActions System InformationAdministration Configuration Switch Static ConfigurationDevice Information Change Username IP ConfigurationPort Configuration Change PasswordPort Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan ConfigurationCreate a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan GroupGroups Sorted Mode MAC Address Configuration Priority ConfigurationPress Edit Static MAC AddressFiltering MAC Address Edit Filtering MAC address Misc. ConfigurationBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm System Configuration STP EnablePerport Configuration Snmp System Options SnmpAdd Community Name Community StringsEdit Community Name Press Add Edit keyTrap Managers Delete Community NameAdd the trap manager Press Space to choose Enabled / DisabledDelete trap manager Press DeleteLacp Working Ports SettingLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup ConfigurationAbout Web-based Management Web-Based ManagementWeb Management Function System LoginWeb Management Overview Unicom Administrator Port StatisticsIP Address Advanced and Miscellaneous Setting Switch Setting BasicPriority Queue Service settings Collisions Retry Forever Miscellaneous SettingUnicom Port Controls Console Port InformationTrunking Aggregator Information Aggregator settingForwarding and Filtering State ActivityIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it BasicPort VID Configure port VID settingsAcceptable Frame type Ingress FilteringPort Mirroring Snmp Trap Manager Security ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI