UNICOM Electric SmartGST-2402M manual Add the trap manager, Delete trap manager, Press Delete

Page 36

UNICOM

SmartGST-2402M

Actions->

<Add>: Create a trap manager.

<Edit>: Modify all items. Press ESC when finished with configuration to go back to the action menu line.

<Delete>: Delete a trap manager. After deleting an item, press <Save> to complete the operation.

<Save>: Save all configured values.

<Quit>: Exit this page and return to previous menu.

_Add the trap manager

1.Press <Add> <Edit> to add the trap manager.

2.IP: Type the IP address.

3.Community Name: Type the community name.

4.Press ESC to go to actions line, press <Save> to save all configured values.

_Delete trap manager

1.Press < Delete >.

2.Choose the trap manager that you want to delete and then press Enter.

3.Pressing <Enter> once will complete deletion operation.

4-4-4 IGMP/GVRP

This page enables or disables the GVRP (GARP VLAN Registration Protocol) support.

Press Space to choose Enabled / Disabled.

Actions->

<Edit>: Configure all items. Press Space to choose Enable or Disable mode. When finished, press ESC to go back to the action menu line.

<Save>: Save all configured values.

<Quit>: Exit this page and return to previous menu.

35

Image 36

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionDesktop Installation Rear PanelAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceMain Menu Main MenuStatus and Counters Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsCommunity Strings Add Community NameEdit Community Name Press Add Edit keyDelete Community Name Trap ManagersPress Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom Administrator Port StatisticsIP Address Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI