UNICOM Electric SmartGST-2402M manual Tftp Backup Configuration, Reboot

Page 75

www.unicomlink.com

UNICOM

5-4-13-2. TFTP Backup Configuration

Use this page to set TFTP server IP address. You can save the current EEPROM value here and then go to the TFTP restore configuration page to restore the EEPROM value.

5-4-14. Factory Default

Reset Switch to default configuration.

Default IP address: 192.168.16.1

Default Gateway: 192.168.16.254

Subnet mask: 255.255.255.0

The other setting value is either Disable or None.

5-4-15. Reboot

Reboot the Switch in software reset.

74

Image 75

Contents Introduction FeaturesSmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching TechnologyStatus Description PowerDesktop Installation Rear PanelAttaching Rubber Feet Attach mounting brackets with screws Rack-mounted InstallationSmall Workgroup Power OnSmall Workgroup Application Segment BridgeLogin in the Console Interface Connecting to the SwitchMain Menu Main MenuStatus and Counters Port Counters Port StatusActions System InformationAdministration Configuration Switch Static ConfigurationDevice Information Change Username IP ConfigurationPort Configuration Change PasswordPort Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan ConfigurationCreate a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan GroupGroups Sorted Mode MAC Address Configuration Priority ConfigurationPress Edit Static MAC AddressFiltering MAC Address Edit Filtering MAC address Misc. ConfigurationBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm System Configuration STP EnablePerport Configuration Snmp System Options SnmpPress Add Edit key Community StringsAdd Community Name Edit Community NameTrap Managers Delete Community NamePress Delete Press Space to choose Enabled / DisabledAdd the trap manager Delete trap managerLacp Working Ports SettingLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup ConfigurationAbout Web-based Management Web-Based ManagementWeb Management Function System LoginWeb Management Overview Unicom Administrator Port StatisticsIP Address Advanced and Miscellaneous Setting Switch Setting BasicPriority Queue Service settings Collisions Retry Forever Miscellaneous SettingUnicom Port Controls Console Port InformationTrunking Aggregator Information Aggregator settingForwarding and Filtering State ActivityIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it BasicPort VID Configure port VID settingsAcceptable Frame type Ingress FilteringPort Mirroring Snmp Trap Manager Security ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI