UNICOM Electric SmartGST-2402M manual Port Mirroring Configuration

Page 20

UNICOM

SmartGST-2402M

<Edit>: Configure all items. When finished with configuration press ESC to go back to action menu line.

<Save>: Save all configured values. Before you leave this session, please execute this command or you will lose all changes.

4-3-4. Port Mirroring Configuration

Port Mirroring is a method of monitoring traffic in switched networks. Traffic through ports can be monitored by one specific port. All traffic going in or out of monitored ports will be duplicated into monitoring port.

Press the Space key to change configuration of each item.

Mirroring state: Mirror mode for TX packet only, RX packet only, or both packets.

Analysis port: Set the destination port of the mirroring packet. All of the packets of mirroring port will be duplicated and sent to Analysis port. Use the SPACE key to select.

Actions->

<Quit>: Exit the port configuration page and return to previous menu.

<Edit>: Configure all items. When finished with configuration press ESC to go back to the action menu line.

<Save>: Save all configured values. Before you leave this session, please execute this command or you will lose all changes.

<Previous Page>: Return to previous page.

<Next page>: Go to next page.

19

Image 20

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionAttaching Rubber Feet Desktop InstallationRear Panel Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceStatus and Counters Main MenuMain Menu Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressMAC Address Aging Time Broadcast Storm Filter ModeMax bridge transmit delay bound Hash Algorithm IFG Compensation Protocol Related Configuration 1.STPCollision Retry Forever STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsCommunity Strings Add Community NameEdit Community Name Press Add Edit keyDelete Community Name Trap ManagersPress Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReset switch to default configuration Reboot Switch Factory DefaultSystem Reboot Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom IP Address AdministratorPort Statistics Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringReport Igmp SnoopingMessage Description Unicom MAC filtering Support Protocol-based Vlan Support Port-based VlanTag-based Vlan Ieee 802.1Q Vlan Support Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Cabling Diagnosing LED IndicatorsIncorrect connections Unicom Technical Specification EMI