UNICOM Electric SmartGST-2402M manual MAC filtering, Vlan configuration

Page 62

UNICOM

SmartGST-2402M

5-4-6-3. MAC filtering

MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses.

1.In the MAC Address box, enter the MAC address that you want to filter.

2.If tag-based (802.1Q) VLANs are set up on the switch, in the VLAN ID box, type the VID associate with the MAC address.

3.Click Add.

4.To delete a filter, choose the MAC address that you want to delete and then click Delete.

5-4-7. VLAN configuration

A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so only members of the VLAN receive traffic from the other members of the same VLAN group. Basically, creating a VLAN on a switch is the equivalent of reconnecting a group of network devices to another Layer 2 switch. However, all the network devices are still plugged into the same switch.

The SmartGST- 2402M supports port- based, 802.1Q (tagged-based), and protocol-based VLAN in the web management page.

61

Image 62

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionAttaching Rubber Feet Desktop InstallationRear Panel Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceStatus and Counters Main MenuMain Menu Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressMAC Address Aging Time Broadcast Storm Filter ModeMax bridge transmit delay bound Hash Algorithm IFG Compensation Protocol Related Configuration 1.STPCollision Retry Forever STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsEdit Community Name Community StringsAdd Community Name Press Add Edit keyDelete Community Name Trap ManagersDelete trap manager Press Space to choose Enabled / DisabledAdd the trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReset switch to default configuration Reboot Switch Factory DefaultSystem Reboot Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom IP Address AdministratorPort Statistics Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringReport Igmp SnoopingMessage Description Unicom MAC filtering Support Protocol-based Vlan Support Port-based VlanTag-based Vlan Ieee 802.1Q Vlan Support Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Cabling Diagnosing LED IndicatorsIncorrect connections Unicom Technical Specification EMI