UNICOM Electric SmartGST-2402M Rack-mounted Installation, Attach mounting brackets with screws

Page 8

UNICOM

SmartGST-2402M

Rack-mounted Installation

The SmartGST-2402M comes with a rack-mounting kit and can be mounted in an EIA standard sized, 19-inch Rack. The Switch can be placed in a wiring closet with other equipment.

Perform the following steps to rack mount the switch:

A.Align one bracket with the holes on one side of the switch and secure it with the smaller bracket screws. Then attach the remaining bracket to the other side of the Switch.

Figure 2-4. Attach mounting brackets with screws

B.After you’ve attached both mounting brackets, position the SmartGST-2402M in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the Switch to the rack with a screwdriver and the rack-mounting screws.

Figure 2-5. Mount the SmartGST-2402M in a standard 19-inch Rack

Note: For proper ventilation, allow about at least 4 inches ( 10 cm ) of clearance on the front and 3.4 inches ( 8 cm ) on the back of the Switch. This is especially important for enclosed rack installation.

7

Image 8

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionAttaching Rubber Feet Desktop InstallationRear Panel Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceStatus and Counters Main MenuMain Menu Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressMAC Address Aging Time Broadcast Storm Filter ModeMax bridge transmit delay bound Hash Algorithm IFG Compensation Protocol Related Configuration 1.STPCollision Retry Forever STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsCommunity Strings Add Community NameEdit Community Name Press Add Edit keyDelete Community Name Trap ManagersPress Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReset switch to default configuration Reboot Switch Factory DefaultSystem Reboot Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom IP Address AdministratorPort Statistics Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringReport Igmp SnoopingMessage Description Unicom MAC filtering Support Protocol-based Vlan Support Port-based VlanTag-based Vlan Ieee 802.1Q Vlan Support Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Cabling Diagnosing LED IndicatorsIncorrect connections Unicom Technical Specification EMI