UNICOM Electric SmartGST-2402M manual Create 802.1Q Vlan

Page 23

www.unicomlink.com

UNICOM

_Create 802.1Q VLAN

Create an 802.1Q VLAN and add tagged /untagged member ports to it.

1.Select <Edit>.

2.VLAN Name: Type a name for the new VLAN.

3.VLAN ID: Type a VID (between 1~4096). The default is 1. There are 256 VLAN groups available.

4.Protocol VLAN: Press the Space key to choose protocol type.

5.Member: Press the Space key to choose a VLAN member. There are three choices:

a.UnTagged: this port is a member port of this VLAN group and outgoing frames are NO VLAN-Tagged frames.

b.Tagged: This port is a member port of this VLAN group and outgoing frames are VLAN-Tagged frames.

c.No: The port is NOT a member of this VLAN group.

6.Press ESC to go back to the action menu line.

7.Select <Save> to save all changes.

22

Image 23

Contents Introduction FeaturesSmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching TechnologyStatus Description PowerAttaching Rubber Feet Desktop InstallationRear Panel Attach mounting brackets with screws Rack-mounted InstallationSmall Workgroup Power OnSmall Workgroup Application Segment BridgeLogin in the Console Interface Connecting to the SwitchStatus and Counters Main MenuMain Menu Port Counters Port StatusActions System InformationAdministration Configuration Switch Static ConfigurationDevice Information Change Username IP ConfigurationPort Configuration Change PasswordPort Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan ConfigurationCreate a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan GroupGroups Sorted Mode MAC Address Configuration Priority ConfigurationPress Edit Static MAC AddressFiltering MAC Address Edit Filtering MAC address Misc. ConfigurationMAC Address Aging Time Broadcast Storm Filter ModeMax bridge transmit delay bound Hash Algorithm IFG Compensation Protocol Related Configuration 1.STPCollision Retry Forever System Configuration STP EnablePerport Configuration Snmp System Options SnmpPress Add Edit key Community StringsAdd Community Name Edit Community NameTrap Managers Delete Community NamePress Delete Press Space to choose Enabled / DisabledAdd the trap manager Delete trap managerLacp Working Ports SettingLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port ConfigurationReset switch to default configuration Reboot Switch Factory DefaultSystem Reboot Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup ConfigurationAbout Web-based Management Web-Based ManagementWeb Management Function System LoginWeb Management Overview Unicom IP Address AdministratorPort Statistics Advanced and Miscellaneous Setting Switch Setting BasicPriority Queue Service settings Collisions Retry Forever Miscellaneous SettingUnicom Port Controls Console Port InformationTrunking Aggregator Information Aggregator settingForwarding and Filtering State ActivityReport Igmp SnoopingMessage Description Unicom MAC filtering Support Protocol-based Vlan Support Port-based VlanTag-based Vlan Ieee 802.1Q Vlan Support Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it BasicPort VID Configure port VID settingsAcceptable Frame type Ingress FilteringPort Mirroring Snmp Trap Manager Security ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Cabling Diagnosing LED IndicatorsIncorrect connections Unicom Technical Specification EMI