UNICOM Electric SmartGST-2402M manual Misc. Configuration

Page 28

UNICOM

SmartGST-2402M

4-3-6-2. Filtering MAC Address

Edit Filtering MAC address

1.Press <Edit> to modify a static Filtering address.

2.Choose the MAC address that you want to modify and then press Enter.

3.Press <Edit> key to modify all the items.

4.Press ESC to go back to the action menu line and then select <Save> to save all configured values.

Delete Filtering MAC address

1.Press <Delete> key to delete a Filtering MAC address.

2.Choose the MAC address that you want to delete and then press Enter.

3.After deleting a Filtering MAC address, press <Save> to complete the deleting operation.

4-3-7. Misc. Configuration

MAC Address Aging Time: MAC address table refresh time setting.

Broadcast Storm Filter Mode: 5%, 10%, 15%, 20%, 25%, N/A. The port will be blocked because the broadcast packet is over the percentage of traffic.

Max Bridge Transmit Delay Bound: On or Off

Low Queue Max Delay Time: 1 to 255

Collision Retry Forever: Disable or Enable

Hash Algorithm: Provide CRC or Direct Map

IFG compensation: Disable or Enable

27

Image 28

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionRear Panel Desktop InstallationAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceMain Menu Main MenuStatus and Counters Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressMax bridge transmit delay bound Broadcast Storm Filter ModeMAC Address Aging Time Collision Retry Forever IFG Compensation Protocol Related Configuration 1.STPHash Algorithm STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsCommunity Strings Add Community NameEdit Community Name Press Add Edit keyDelete Community Name Trap ManagersPress Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationSystem Reboot Reboot Switch Factory DefaultReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom Port Statistics AdministratorIP Address Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringMessage Description Igmp SnoopingReport Unicom MAC filtering Tag-based Vlan Ieee 802.1Q Vlan Support Support Port-based VlanSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Incorrect connections Diagnosing LED IndicatorsCabling Unicom Technical Specification EMI