UNICOM Electric SmartGST-2402M manual Vlan Configuration, Vlan Configure

Page 21

www.unicomlink.com

UNICOM

4-3-5. VLAN Configuration

This is where you can configure the VLAN mode as port-based VLAN, 802.1Q VLAN, or disabled VLAN.

NOTE: After changing the VLAN mode, you must reset the switch before changes will take effect.

4-3-5-1. VLAN Configure

VLAN Mode: There are three options available: Port based VLAN, IEEE802.1Q Tag based VLAN, and VLAN disabled.

VLAN (Port VID: 1 ~ 255): Type the PVID.

Acceptable Frame type: It matches the Ingress Filtering Rule 1 on the Web. It forwards only packets with VIDs matching this port°¶s configured VID. Press Space to choose whether to forward or drop the frames that do not match the VID for this port°¶s configured VID.

Ingress Filter: It matches the Ingress Filtering Rule 2 on the web. It drops untagged frames. Press Space to choose to drop and forward of untagged frames.

20

Image 21

Contents Introduction FeaturesSmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching TechnologyStatus Description PowerDesktop Installation Rear PanelAttaching Rubber Feet Attach mounting brackets with screws Rack-mounted InstallationSmall Workgroup Power OnSmall Workgroup Application Segment BridgeLogin in the Console Interface Connecting to the SwitchMain Menu Main MenuStatus and Counters Port Counters Port StatusActions System InformationAdministration Configuration Switch Static ConfigurationDevice Information Change Username IP ConfigurationPort Configuration Change PasswordPort Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan ConfigurationCreate a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan GroupGroups Sorted Mode MAC Address Configuration Priority ConfigurationPress Edit Static MAC AddressFiltering MAC Address Edit Filtering MAC address Misc. ConfigurationBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm System Configuration STP EnablePerport Configuration Snmp System Options SnmpAdd Community Name Community StringsEdit Community Name Press Add Edit keyTrap Managers Delete Community NameAdd the trap manager Press Space to choose Enabled / DisabledDelete trap manager Press DeleteLacp Working Ports SettingLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup ConfigurationAbout Web-based Management Web-Based ManagementWeb Management Function System LoginWeb Management Overview Unicom Administrator Port StatisticsIP Address Advanced and Miscellaneous Setting Switch Setting BasicPriority Queue Service settings Collisions Retry Forever Miscellaneous SettingUnicom Port Controls Console Port InformationTrunking Aggregator Information Aggregator settingForwarding and Filtering State ActivityIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it BasicPort VID Configure port VID settingsAcceptable Frame type Ingress FilteringPort Mirroring Snmp Trap Manager Security ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI