UNICOM Electric SmartGST-2402M manual System Login, Web Management Function

Page 48

UNICOM

SmartGST-2402M

The Web-Based Management supports Internet Explorer 6.0 for Windows. It is based on Java Applets with an aim to reduce network bandwidth consumption, enhance access speed, and presents easy navigation.

Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. The user has to explicitly modify the browser setting to enable Java Applets to use network ports.

System Login

1.Start Internet Explorer.

2.Type “http://” plus the IP address of the Modular Switch in the Location or Address field. Press Enter.

3.The Password screen appears.

4.Type user name and password. The default is “ root ” for User name and “root” for Password.

5.Press “Enter” or Click ”OK”. The Home Screen of the Web-based management appears.

Web Management Function

1.The default values for the switch are as follows:

If you need to change the IP address the first time you login, you can use the Console Mode to modify it here.

IP Address: 192.168.16.1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.16.254

User Name: root

Password: root

2.Type in http://192.168.16.1, and then enter the user name and password as above.

47

Image 48

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionDesktop Installation Rear PanelAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceMain Menu Main MenuStatus and Counters Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressBroadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsCommunity Strings Add Community NameEdit Community Name Press Add Edit keyDelete Community Name Trap ManagersPress Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationReboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom Administrator Port StatisticsIP Address Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringIgmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI