UNICOM Electric SmartGST-2402M manual Create a Vlan Group

Page 22

UNICOM

SmartGST-2402M

4-3-4-2. Create a VLAN Group

_Create Port-Based VLAN

Create a port-based VLAN and add member/nonmember ports to it. Select <Edit>.

VLAN Name: Type a name for the new VLAN.

Group ID: Type the VLAN group ID. The group ID range is 1 ~ 4096.

Member: Press Space key to choose VLAN member. There are two choices:

Member: The port is a member port.

NO: The port is NOT a member port.

Press “ESC” to go back to the action menu line. Select <Save> to save all configured values.

NOTE: If a trunk group exists, you can see it (ex: TRK1, TRK.) after port 26 and configure it whether it is a member of the VLAN or not.

21

Image 22

Contents Features IntroductionSmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front PanelPower Status DescriptionRear Panel Desktop InstallationAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screwsPower On Small WorkgroupSegment Bridge Small Workgroup ApplicationConnecting to the Switch Login in the Console InterfaceMain Menu Main MenuStatus and Counters Port Status Port CountersSystem Information ActionsSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change UsernameChange Password Port ConfigurationPort Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan ConfigureCreate a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete itemGroups Sorted Mode Priority Configuration MAC Address ConfigurationStatic MAC Address Press EditMisc. Configuration Filtering MAC Address Edit Filtering MAC addressMax bridge transmit delay bound Broadcast Storm Filter ModeMAC Address Aging Time Collision Retry Forever IFG Compensation Protocol Related Configuration 1.STPHash Algorithm STP Enable System ConfigurationPerport Configuration Snmp Snmp System OptionsEdit Community Name Community StringsAdd Community Name Press Add Edit keyDelete Community Name Trap ManagersDelete trap manager Press Space to choose Enabled / DisabledAdd the trap manager Press DeleteWorking Ports Setting LacpLacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous ConfigurationSystem Reboot Reboot Switch Factory DefaultReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem UpgradeWeb-Based Management About Web-based ManagementSystem Login Web Management FunctionWeb Management Overview Unicom Port Statistics AdministratorIP Address Switch Setting Basic Advanced and Miscellaneous SettingPriority Queue Service settings Miscellaneous Setting Collisions Retry ForeverUnicom Console Port Information Port ControlsTrunking Aggregator setting Aggregator InformationState Activity Forwarding and FilteringMessage Description Igmp SnoopingReport Unicom MAC filtering Tag-based Vlan Ieee 802.1Q Vlan Support Support Port-based VlanSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to itConfigure port VID settings Port VIDIngress Filtering Acceptable Frame typePort Mirroring Snmp Security Manager Trap ManagerSystem Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Incorrect connections Diagnosing LED IndicatorsCabling Unicom Technical Specification EMI