UNICOM Electric SmartGST-2402M manual System Configuration

www.unicomlink.com UNICOM

4-4-5-1. System Configuration

When enabling the IEEE 802.1X function, all parameters can be configured.

1.Radius Server IP: Set the Radius Server IP address.

2.Shared Key: Set an encryption key to use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.

3.NAS Identifier: Set the identifier for the radius client.

4.Server Port: Set the UDP destination port for authentication requests to the specified Radius Server.

5.Accounting Port: Set the UDP destination port for accounting requests to the specified Radius Server.

40