2.1.5.3 Jumper Settings for Display Color Setup
To change the color of the lower display follow the instructions below: 1. The unit should be removed from the panel and opened.
Refer to Section 2.1.4.3 for assembly and disassembly instructions.
2. Locate S1 jumper, on the back side of the display board. Select the position for your color choice of Red, Green or Amber.
Display Board
RED | S1 |
| S1 |
| GREEN |
| |
GREEN |
| RED | |
S1 |
| ||
|
| ||
AMBER | S1 (Open) |
|
|
| 1 |
|
|
| 8 ON |
|
|
| 4 | 3 | 2 |
| ON |
| 1 |
|
|
|
Figure 2.10 Location of S1 Jumper
To change the color of the upper Display, see Section 4.3.7.5.
14