4.3.7 Setup
This section is used to configure the Meter online. Click on the specific settings to change the parameters on that section
4.3.7.1 Input
Control End Device ID: Insert the End Device ID number that will be used as input to control
Filter: This option allows the user to specify the number of readings stored in
the Digital Averaging Filter. Choice of: 1, 2, 4, 8, 16, 32, 64, 124.
Temperature Unit: Unit of temperature readings, [ ºC or ºF ].
SETUP
Address http://192.168.1.200
SETUP
Input
Control End Device ID: | 5 |
for Retransmission and On/Off |
|
Filter | 4 |
Temperature Unit | F |
Update
Cancel
Main Menu
Figure 4.15 Input
38