Omega WI8XX-U manual Dip Switches, Position

2.1.5.4 Dip Switches

To change the DIP switches, follow the instructions below:

1. The unit should be removed from the panel and opened.

Refer to Section 2.1.4.3 for assembly and disassembly instructions.

2. Locate the 4 and 8 position DIP switches, on the top board. The Meter is shipped with all DIP switches in "OFF" position

To set the Wireless and Ethernet settings to Factory Default, Refer to Section 7.

S1 1

8	OFF	1
	8	ON
OFF		ON

ON

8 Position

DIP Switch on

Wireless Board

1 To change the Wireless settings to Factory Default

2-8 N/A

4 3 2 OFF 1

		4	3 2	1
	4 Position			OFF
	DIP Switch on	ON
	Ethernet Board
1
	N/A
2	To change the Ethernet settings to
3	Factory Default
	To enable/disable DHCP
4	N/A

Figure 2.11 Location of DIP Switches

15