Omega WI8XX-U manual Part Specifications

INSULATION Power to Output:

Power to Relays/SSR Outputs: Relays/SSR to Relay/SSR Outputs:

GENERAL Display:

Digital Filter:

PART 6
SPECIFICATIONS
ON/OFF CONTROL OUTPUT 1 & 2
Relay:	250 Vac or 30 Vdc @ 3 A (Resistive Load), SPDT
Solid State Relay (SSR):	20 to 265 Vac @ 0.05 to 0.5 A (Resistive Load);
DC Pulse:	continuous
	Non-Isolated; 10 Vdc @ 20 mA
Analog Output (Output 1 only)	Non-Isolated, 0 to 10 Vdc or 0 to 20 mA, 500 Ω
Operation:	max
	Direct (cool), reverse (heat); deadband; single
Configuration	sensing input
	Output 1 and 2 can be configured as Alarm 1
	and 2, respectively. Analog Output for Output 1
	can be configured as retransmission.
ALARM 1 & 2 (PROGRAMMABLE)
Type:	SPDT Relay, SSR, and DC Pulse
Operation:	High/low, above/below, band, latch/unlatch,
	normally open/normally closed and
	process/deviation; front panel configurations;
	single/multiple sensing input(s)
ANALOG RETRANSMISSION OUTPUT (PROGRAMMABLE)
Type:	Non-Isolated, Retransmission 0 to 10 Vdc or
Operation:	0 to 20 mA, 500 Ω max (Output 1 only).
	Single sensing input; accuracy is + 1% of FS
	when following conditions are satisfied:

1) Input is not scaled below 1% of Input FS.

2) Analog Output is not scaled below 3% of Output FS.

2300 Vac per 1 min. test

1500 Vac per 1 min. test

(Low Voltage/Power Option)

2300 Vac per 1 min. test

2300 Vac per 1 min. test

4-digit, 9-segment LED, 10.2mm (0.40") and 21mm (0.83") red, green and amber programmable colors

Programmable

71