Omega WI8XX-U manual Changing TCP/IP Properties on Your Computer, Section

3.5.2 Changing TCP/IP Properties on Your Computer

Go to your computer’s Control Panel then Network Connections. Pick the network with the proper Ethernet card. Right click and choose

Properties

Look for Internet Protocol, click on it and press Properties

	Figure 3.3 Network Connections
Setup the IP address (in this case, 192.168.1.1) as shown below and press OK
		You can access the Meter’s Web
		Server via any internet browser
		using IP address of 192.168.1.200.
		Once you log into the Meter’s Web
		Server, you will be able to change its
		IP configuration according to
		Section 4.2.
			After you configure the
			Meter’s IP configurations,
			you should go back and set
			your PC’s previous IP
.			settings.
	Figure 3.4 Network Connections

20