NETGEAR WG302v2 manual Chapter Management and Information, Changing the Administrator Password

Chapter 3

Management and Information

This chapter describes how to use the management and information features of your ProSafe 802.11g Wireless Access Point. To get to these features, connect to the WG302v2 as described in “Logging in to the WG302v2 Using Its Default IP Address” on page 2-7.

Changing the Administrator Password

The default password is password. NETGEAR recommends that you change this password to a more secure password. You cannot change the administrator login name.

To change the default password:

1.From the WG302v2 main menu, click Change Password to go to the menu shown below.Figure 3-1

2.Change the password by first entering the old password, and then enter the new password twice.

3.Click Apply to save your change.

Figure 3-1

Management and Information 3-1

v1.0, May 2006