NETGEAR WG302v2 manual Configuring Advanced IP Settings

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-13 AP Information (continued)

Task Command

Save the list of Known APs	set known-ap-list action export
	config-file <file_name> config-server
	<tftp_server>
	Example:
	set known-ap-list action export
	config-file wg302Rogue3.cfg
	config-server tftp://192.168.24.10/
	knownAP
Import a list of known APs	set known-ap-list action import
	config-file <file_name>
	config-server <tftp_server>
	Example:
	set known-ap-list action export
	config-file wg302Rogue3.cfg
	config-server tftp://
	192.168.24.10/knownAP

Configuring Advanced IP Settings

The commands in Table C-14correspond to the IP Settings page on the Web UI under the Advanced heading.

Table C-14 Advanced IP Setting s

Task	Command
View all DHCP server information	get dhcp-server detail
Enable the DHCP Server	set dhcp-server status up
Disable the DHCP Server	set dhcp-server status down
Set the Starting IP Address	set dhcp-server ipstart <ip_address>
Set the Ending IP Address	set dhcp-server ipend <ip_address>
Set the Subnet Mask	set dhcp-server netmask <subnet_mask>
Set the Gateway IP Address	set dhcp-server gateway <ip_address>
Set the Primary DNS Server	set dhcp-server dns1 <ip_address>
C-16	Command Line Reference

v1.0, May 2006