NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
•Multiple BSSIDs. Support for multiple BSSIDs. When one AP is connected to a wired network and a set of wireless stations, it is referred to as a Basic Service Set (BSS). The Basic Service Set Identifier (BSSID) is a
•DHCP Client and Server Support. DHCP provides a dynamic IP address to PCs and other devices upon request. The WG302v2 can obtain network information from a DHCP server on your network. The AP can also act as a DHCP server and provide network information for wireless clients.
•SNMP Support. Support for Simple Network Management Protocol (SNMP) Management Information Base (MIB) management.
WG302v2 Key Features
The WG302v2 provides solid functionality, including these features:
•Multiple Operating Modes
–Wireless Access Point. Operates as a standard 802.11b/g wireless access point.
–
–
–Wireless Repeater. In this mode, the WG302v2 operates as both a wireless access point and a wireless bridge.
•Rogue Access Point Detection. For enhanced security, you can scan the wireless network to detect rogue access points.
•Hotspot Settings. You can allow all HTTP (TCP, port 80) requests to be captured and
•Upgradeable Firmware. Firmware is stored in a flash memory and can be upgraded easily, using only your Web browser, and can be upgraded remotely. You can also upgrade firmware from the command line interface (CLI) by using TFTP.
•Access Control. The Access Control MAC address filtering feature can ensure that only trusted wireless stations can use the WG302v2 to gain access to your LAN.
•Security Profiles. When using multiple BSSIDs, you can configure unique security settings (encryption, SSID, etc.) for each BSSID.
Introduction |