NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
Remote Management
To access the Remote Management screen:
1.Enter the LAN address of the WG302v2 into the address field of your browser.
2.After you log in, click Remote Management under Management on the main menu
.
Figure
3.Enter the Remote Management information.
•Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote access via Secure Shell and Secure Telnet. The default is Enable.
•SNMP: Enable SNMP to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
•Public Community Name: The community string to allow the SNMP manager to read the wireless access point's MIB objects. The default is public.
•Private Community Name: The community string to allow the SNMP manager to read and write the wireless access point's MIB objects. The default is private.
•Community Name for Traps: The community string associated with the IP address to Receive Traps. There is no default value.
•IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from the wireless access point. The default is 0.0.0.0.
4.Click Apply to save your settings.
Management and Information |